Samsung GALAXY CORE Prime User Manual page 285

Enable Your Phone to be Discoverable to Other Devices: From Bluetooth settings, tap
n
your phone name.
Tap the phone name to toggle visible/not visible setting.
l
The indication below the phone name shows its visibility status.
l
After the predetermined time, the phone returns to hidden mode and is no longer
l
discoverable by nearby devices.
This setting is available when Bluetooth is enabled.
l
Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
n
Bluetooth settings, tap the device name in "Available devices" and follow the onscreen
instructions.
Depending on the device, you may be required to enter or accept a passkey.
l
If the target device does not appear, tap Scan to search again.
l
This setting is available when Bluetooth is enabled.
l
Change the Name of a Paired Device: From Bluetooth settings, tap Settings
n
paired device name, tap Rename, enter a new name, and tap OK.
Emoji cannot be used in a device name.
l
This setting is available when Bluetooth is enabled.
l
Cancelling Pairing: From Bluetooth settings, tap Settings
n
and then tap Unpair.
This setting is available when Bluetooth is enabled.
l
Enable Service from Paired Device: From Bluetooth settings, tap Settings
n
paired device name, and then tap the listing under Profiles.
If a confirmation prompt appears, follow the onscreen instructions.
l
This setting is available when Bluetooth is enabled.
l
This setting is available when the paired device is providing a service.
l
Tap the ON/OFF switch to turn the option on or off.
l
Search for Other Devices: From Bluetooth settings, tap Scan.
n
This setting is available when Bluetooth is enabled.
l
Set Visibility Timeout: From Bluetooth settings, tap More options > Visibility timeout
n
and select an option.
Settings
next to a
next to a paired device name,
next to a
277