Printing Labels - Lexmark Color Jetprinter Z600 Series User Manual

Step 4: Build your booklet
After your document prints, stack and bind your booklet.
To build your booklet:
1
Remove the first bundle from the paper exit tray, fold it in half, and then set it aside.
2
Remove the next bundle, fold it in half, and then stack it on top of the first bundle.
3
Continue to stack the bundles on top of each other until your booklet is complete.
4
Bind the bundles to complete your booklet.

Printing labels

You can load up to 25 sheets of labels, depending on the thickness of the sheets.
Step 1: Load the labels
• Use labels designed for inkjet printers.
• If your labels include instructions, read them carefully.
• Load the labels vertically against the right side of the paper support.
• Make sure your labels are not used or damaged.
Printing labels
27