Bluetooth Pairing And Disconnecting - Ematic ESB107 User Manual

Bluetooth Pairing
1. Switch MODE to Bluetooth mode. The
speaker will say, "Bluetooth mode". The
LED Light will flash blue 5 times.
2. Short press the multi-function button. The
LED light will flash green to indicate
bluetooth pairing.
3. Follow the Bluetooth instructions on your
cell phone to pair with the speaker.
4. When the speaker is discoverable, tap on
"ESB107". Wait for the device to connect.
5. The speaker will say, "Bluetooth connected"
when your device is connected. The LED
Light will be blue.
Disconnect Bluetooth
When you disconnect from the speaker, it
will say, "Bluetooth disconnected". The
speaker will flash green when disconnected
from bluetooth.
Phone Controls
(In Bluetooth mode)
Answer Call/ End Call
Cancel Dial
Pair Bluetooth
To redial last number double-click the button.
To reject calls hold button for 2 seconds
MicroSD Playback
To use MicroSD Playback, switch the
speaker from MODE to SD/AUX. Then press
the multi-function button .
MicroSD/AUX Toggle
Hold multi-function button for 2 seconds to
switch between MicroSD card mode and
AUX mode.
Line-In
To use line-in, switch MODE to SD/AUX.
Then press the multi-function button.
Customer Support
Visit ematic.us/support for customer service
regarding your device.
To submit a request, fill out the required
information online. You will be provided a
ticket number regarding your issue, which
you can refer to when contacting us further.
©2014 Ematic. All Rights Reserved. Bluetooth and the
Bluetooth logo are trademark of Bluetooth SIG, Inc and
used by Ematic under a license. 1 Year warranty from the
date of purchase, 90 days only on labor.