Reset Feature (100/200/250/300/350) Or Power-On/Off (Kdc20/30) - KoamTac KDC20 User Manual

KDC User Manual
3.7 Reset Feature (100/200/250/300/350) or Power-
The Reset feature allows you to restart the KDC100/200/250/300/350/400 if necessary, without
losing any stored barcode data or option settings. To reset the KDC, follow the below steps.
1.
2.
3.
Note
However, if you are using the KDC20/30, you can turn the power on and off by pressing the
DOWN and SCAN button simultaneously for 5 seconds. When the LED light is green, you can
release the buttons and the power will be on. When you turn off the KDC20/30, you will hear
a beep sound after pressing the DOWN and SCAN buttons simultaneously.
75
on/off (KDC20/30)
Press the DOWN and SCAN buttons simultaneously for 5 seconds.
When the LEDs illuminate orange, release the buttons.
The KDC initial screen, KoamTac Data Collector KDC, displays when reset is
complete.
The KDC stores collected data into flash memory and will not lose data nor the
KDC settings during the reset process.
O
PERATING YOUR
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.
KDC