Wiring Connection; Part List For Installation - Kenwood KDC-262U Instruction Manual

Wiring connection

Front output
Rear/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
JS_KWD_KDC_262U_KN_EN_06.indd 17
/ /
White
White/Black
Gray Brown
(Mute control wire)
Gray/Black
Green
Green/Black
Purple
Blue/White
Purple/Black
(Power control wire/
Antenna control wire)
Red
(Ignition wire)
Yellow Light blue/yellow
(Battery wire) (Steering remote
control wire)
: / /
Rear/ subwoofer output
Fuse (10 A)
If no connections are made, do not let the wire come out from the tab.
To the terminal that is grounded when the
telephone rings or during conversation
( 14)
(To connect the Kenwood navigation system,
refer your navigation manual.)
To the power control terminal when using
the optional power amplifier or to the
antenna control terminal in the vehicle
To the steering wheel remote control
adapter

Part list for installation

:
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
17
ENGLISH
22/7/2014 2:24:50 PM