Download Print this page

Power Source - Sanyo RP-LT1000D Instruction Manual

Fm/am digital radio

Advertisement

FOR SAFE AND
EFFICIENT OPERATION
-
The apparatus shall not be exposed
to dripping or splashing.
-
No objects filled with liquids, such as
vases, shall be placed on the
apparatus.
-
Do not disassemble or alter the unit in
any way.
-
Do not expose the unit to extreme
temperatures, such as those caused
by a hot stove or the inside of car
parked in the summer sun, such con-
ditions can damage the unit. Always
clean with a soft cloth dampened with
water only.
4
3
2
1
1. Tuning buttons
(TUNING +, TUNING -)
2. Memory button (MEMORY)
3. Band select button (BAND)
4. Preset tuning buttons
(PRESET +, PRESET -)
5. Earphone socket (
TO INSTALL THE BATTERIES
1.
Open the battery compartment lid by
sliding the lid in the direction of the
arrow.
2.
Insert one "AAA/R03/HP16" size bat-
tery (not supplied) into the battery
compartment. As shown follows:
3.
Close the battery compartment lid.
CONTROLS
5
)

POWER SOURCE

CLEANING
Wipe the outside of the unit with a clean
soft cloth, moistened with lukewarm water
and wrung dry. Do not use solvents such
as benzene or thinner which will perma-
nently damage the surface of the unit.
6
7
8
9
6. Volume control
(- VOLUME +)
7. Power button (POWER)
8. Hold switch (HOLD a)
9. Battery compartment
(back panel)
NOTE:
-
Alkaline battery is recommended.
-
Rechargeable battery may result in
shorter playing time.
-
Dispose of battery in the proper man-
ner according to state and local
regulations.
-
Any battery may leak electrolyte if
inserted incorrectly; if disposed of in
fire; or if an attempt is made to charge
a battery not intended to be recharged.
-
Discard leaky battery immediately to
avoid possible skin burn or other per-
sonal injury.
-
If alkaline battery is weak and
discharged, "
display. If this occurs, recharge the
rechargeable battery or replace the
alkaline battery.
" blinks on the

Advertisement

loading