Pin 1 / Pin 2; Changing Pin; Setting Up Cost Monitoring - Funkwerk elmeg T240 Operating Instructions Manual

Commissioning the phone part
·
Activate/ de-activate LCR (see page 49)
·
Changing PIN 1 or PIN 2 (see page 45)

PIN 1 / PIN 2

You can prevent misuse of your PABX by other parties by implementing various security functions. Your PABX set-
tings can be protected using your 4-digit PIN1 (code number). Access by external parties (remote access) is protected
using your 6-digit PIN2.
PIN 1 (4-digit): Security precaution against misuse of your PABX by other parties.
PIN1 is a 4-digit code number that is required when you wish to protect your system settings against unauthorized
access.
PIN 2 (6-digit): Security for settings made from external telephones
For the settings:
·
Call forwarding (Follow me) from external location
·
Room monitoring from external location
prevent unauthorized parties from using your PABX. Only after you enter this 6-digit PIN2 are you allowed to utilize
functions in your PABX that can be activated/deactivated from external telephones.
Note:
Remote access using this 6-digit PIN2 is only possible when this PIN2 has been changed individually, i. e. it is no
longer in its initial setting of 000000.

Changing PIN

Begin the configuration procedure (see page 45).
911
Change PIN1
(4-digit)
Write down your PIN and keep it in a safe place, because if you forget or lose your PIN 1 you will no longer have access
for configuring the PABX.

Setting up cost monitoring

Clearing the charge counters for one or all of the users
850
Code internal number (for one) or
Setting up / delete call accounts
Input this parameter with 3 places after the decimal point. For example
Amount: 100 Euros Enter: 100 000
Amount: 3.50 Euros
46
912
or
Change PIN2
(6-digit)
t *
or
* for all internal users
Enter: 3 500
t t
Input new Input new
PIN PIN
q
Ack.
signal
q
Ack.
signal