Selecting A Record Mode - Olympus C-8080 Wide Zoom Quick Start Manual

• The number of storable still pictures that can be taken may change according to
the subject or factors such as whether print reservations have been made or not.
Note
In certain instances, the number of remaining pictures displayed on the monitor
does not change even when you take pictures or stored images are erased.
• In some cases, the larger the capacity of the card, the greater the difference
between the calculated number of pictures and the actual number of pictures.
• If movies are shot with VIDEO OUT set to PAL and the AV cable connected, the
movie recording time will differ from the time listed in the Movie Record Modes table.

Selecting a record mode

Mode dial
1
Turn the control dial while holding down
K to select the record mode.
• The record mode changes in the sequence shown
below.
Still Picture Record Modes
RAW
SQ2
Movie Record Modes
SHQ
2
If you selected a still picture record mode,
press e while holding down K to display
the screen for selecting the resolution.
If you selected TIFF, SHQ or HQ, press ac
3
to select a resolution, then press e.
If you selected SQ1 or SQ2, press ac to
select a resolution, then press d. Press
ac to select HIGH or NORMAL, then
press e.
TIFF
SQ1
HQ
K Record
mode button
SHQ
HQ
RAW
SQ
tIFF
SEt
3264 2448
3264 2176
SELECt
When HQ is selected
SQ1
2592 2592 1944 1944
2288 1712
2048 1536
SELECt SEt
When SQ1 is selected
Record mode
Control dial
6
Arrow pad
OK button
SHQ
HQ
SQ1
HQ
GO
HIGH
NORMAL
GO
105