Table of Contents
Related Manuals for Miele W 5800 HomeCare XL
Summary of Contents for Miele W 5800 HomeCare XL
-
Page 1: Operating Instructions
Operating instructions for Washing machine W 5800 HomeCare XL en - GB To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. -
Page 2: Caring For Our Environment
Caring for our environment Disposal of the packing Disposal of your old machine material Electrical and electronic machines often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for disposal human health and to the environment. -
Page 3: Table Of Contents
Contents Caring for our environment ......... 2 Warning and Safety instructions . - Page 4 Contents Detergent ............33 The correct detergent .
- Page 5 The Miele Waterproof system ........
-
Page 6: Warning And Safety Instructions
Any other usage is not supported by to property. the manufacturer and could be dangerous. Miele cannot be held liable To avoid the risk of accidents and for damage resulting from incorrect or damage to the washing machine,... - Page 7 If the connection cable is faulty it data on the data plate (voltage and must only be replaced by a Miele frequency) match the mains electricity approved service technician to protect supply. If in any doubt, consult a the user from danger.
-
Page 8: Correct Use
Do not make any alterations to the washing machine, unless authorised to Flooding danger. do so by Miele. If hooking the drain hose into a wash basin, check that the water can drain off quickly enough to prevent the sink Correct use from overflowing. - Page 9 A lukewarm water immediately. If special descaling agent is available to swallowed, seek medical assistance order from the Miele Spare Parts immediately and retain the packaging Department or via the internet on or label for reference. Those with skin www.miele-shop.com.
-
Page 10: Operating The Washer-Extractor
Operating the washer-extractor Control panel a EcoFeedback button g PC/Optical interface See "Washing environmentally and This is used by service technicians economically" for more details about to run diagnostic checks on your this function. machine and can also be used to update programming data in the b Extra option buttons future. - Page 11 Operating the washer-extractor Second function of the Delay start Programme duration (V), Temperature (OK) and Spin After the start of a programme, the speed (W) buttons estimated programme duration will appear in the display in hours and minutes. When delay start is being used, the programme duration will appear after the delay start time has elapsed.
-
Page 12: Before Using For The First Time
Before using for the first time Setting the language Before using the machine for the first You will be asked to select the time ensure that it is correctly language you require for the display. It installed and connected. See is possible to change the language at "Installation and connection". -
Page 13: Washing Environmentally And Economically
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy – Do not exceed the amounts of usage are determined by the size of detergent recommended by the the load. manufacturer on the packaging. To make the most out of your –... -
Page 14: Eco Feedback
Washing environmentally and economically Eco feedback The probable consumption levels will then be displayed by a bar chart. The Eco feedback button is used for calling up information about the eeefff eeffff Energy Water machine's energy and water If there are more tall bars ( ) than short consumption. -
Page 15: How To Wash Correctly
How to wash correctly Brief instructions If you use a solvent-based clean- The headings numbered A, B, C, . . . ing agent (e.g. one containing ben- show the operating sequence and can zene) to pre-treat a stain, make sure be used as brief instructions. - Page 16 How to wash correctly B Switch on the washing machine D Select a programme C Load the drum A Selecting programmes using the programme selector ^ Press the Door button to open the drum door. ^ Unfold the laundry and load loosely into the drum.
- Page 17 How to wash correctly The following will appear in the display: Further programmes are available under the programme setting HomeCare 4. B Selecting programmes using the programme selector at the HomeCare 4 position and the display ^ Scroll through the list using the Delay start (V) and Spin speed (W) buttons.
- Page 18 How to wash correctly F Select an extra option(s) Pre-wash The Pre-wash button is used for activating the pre-wash as well as for selecting a soak duration of one or two hours. Press the button: Once = Pre-wash Twice = Pre-wash + 1 hour soak 3 times = Pre-wash + 2 hour soak 4 times = option not selected Water plus...
- Page 19 How to wash correctly G Select Delay start (if required) The start of a programme can be delayed from 30 minutes up to 24 hours, allowing you to make use of night-time economy electricity rates, for example. See "Delay start" for more information. H Add detergent It is important to dispense the correct amount, because...
- Page 20 How to wash correctly I Start the programme Check that all items have been ^ Press the flashing Start/Stop button. removed from the drum. Items left in If a delay start time has been selected, the drum could discolour other items then this will count down in the display.
-
Page 21: Spinning
Spinning Final spin speed To omit the final spin (Rinse hold) ^ Select the Rinse hold (e) setting Programme using the Spin speed button. The Cottons 1600 laundry will not be spun and will Minimum iron 1200 remain suspended in the final rinse Delicates water. -
Page 22: Delay Start
Delay start Delay start allows you to choose when Altering delay start you want the programme to start. The You can change the delay start time at start of a programme can be delayed any time by pressing the Delay start from 30 minutes up to a maximum of 24 button. -
Page 23: Programme Chart
Programme chart Cottons 9876* cold to 95°C Max. load 7.0 kg Use for Cotton, linen or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Notes – Selecting the 60°C wash temperature will give the performance of a Cottons 60°C programme, however for energy saving and environmental protection reasons the actual wash temperature reached will be lower. - Page 24 Programme chart Proofing 40°C Max. load 2.5 kg Use for Treating microfibre fabrics, skiwear, and table linen made from mainly synthetic fibres to provide a water and stain resistant finish. Notes – The items should be freshly laundered and spun or dried before proofing.
- Page 25 Cleaning the washing machine will significantly reduce bacteria, fungus and biofilm and help prevent the build-up of unpleasant odours. Notes – Optimum results can be achieved by using Miele machine cleaner. Alternatively a universal powder detergent can be used. – Dispense the machine cleaner or universal powder via the detergent compartment.
- Page 26 Programme chart Dark garments / Denim cold to 60°C Max. load 3.0 kg Use for Black and dark garments made from cotton, mixed fibre or denim. Notes – Wash inside out. – Denim often contains excess dye and may run during the first few washes.
-
Page 27: Extra Options
Extra options The following extra options can be selected in addition to the programme: Cottons Minimum iron Delicates Woollens handcare / Proofing Express 20 Down duvets Pillows Down filled items Curtains Bathrobes Maintenance prog. Automatic plus Shirts Dark garments / Denim Hygiene Intensive plus* Spin... -
Page 28: Programme Sequence
Programme sequence Main wash Rinses Spinning Water Wash Water Rinses Interim Final level rhythm level spin spin 1)2) Cottons Minimum iron Delicates – Woollens / Proofing – – – Express 20 Down duvets – Pillows – Down filled items – Curtains –... - Page 29 Programme sequence d = Low water level Special features in the programme sequences: ( = Medium water level Anti-crease: e = High water level At the end of every programme, with a = Intensive rhythm the exception of the Woollens b = Normal rhythm programme, the drum continues to turn at intervals for up to 30 minutes to help...
-
Page 30: Garment Care Label Symbols
Garment care label symbols Washing Ironing The figure quoted in the bucket is the The number of dots indicates the maximum temperature the garment ironing temperature can be washed at. The number of Hot iron (max sole plate temp. bars under the symbol indicates the approx. -
Page 31: Changing The Programme Sequence
Changing the programme sequence Cancelling a programme Changing a programme You can cancel a programme at any After the start of a programme it is no time after it has started. longer possible to select a different programme. ^ Press the Start/Stop button. Temperature Cancel programme ^ Press the flashing Start/Stop button... -
Page 32: Adding Or Removing Laundry After A Programme Has Started
Changing the programme sequence Adding or removing laundry Safety lock after a programme has started The safety lock prevents the machine ^ Press the Door button to open the from being opened and programmes drum door. from being cancelled during a wash programme. -
Page 33: Detergent
Do not use biological detergents on silk as the enzymes may damage the silk! Instructions for use and recommended dosage amounts are given on the detergent packaging. See "Optional accessories" at the end of this booklet for details of Miele branded care products including detergents and fabric conditioner. - Page 34 Detergent Universal Detergent Detergent Specialist Proofing Fabric detergent detergent* agent** conditioner coloureds delicates Cottons – – – Minimum iron – – – Delicates – – Woollens / – – – – Proofing – – – – – Express 20 – –...
- Page 35 Liquid detergent For programmes with a pre-wash you will need to purchase a special container from the Miele Spare Parts Department which sits in the main wash compartment j. Add liquid detergent to this container for the main wash and...
-
Page 36: Water Softener
No visible dirt or stains. Possibly softener. slight body odour. Miele branded water softening tablets Normally soiled are available from the Miele Spare Parts Visibly dirty and/or just a few slight Department or via the internet on stains. www.miele-shop.com. Heavily soiled... -
Page 37: Fabric Conditioners And Liquid Starch
Detergent Fabric conditioners and liquid If starching frequently, thoroughly starch clean the dispenser compartment, Starch especially the siphon tube and Stiffens and gives body to items of fabric conditioner channel, regularly. laundry, e.g. shirts, tablecloths and bed See "Cleaning the detergent linen. -
Page 38: Cleaning And Care
Cleaning and care A range of Miele branded cleaning and Do not use solvents, abrasive conditioning products is available to cleaners, glass cleaners or multi- order from Miele or the internet at www.miele-shop.com. purpose cleaning agents. These could damage plastic surfaces and other parts. - Page 39 Cleaning and care ^ Clean the siphon. Cleaning the detergent dispenser drawer housing 1. Remove the siphon from compartment § and rinse under ^ Use a bottle brush to remove warm running water. Clean the detergent residues and limescale siphon tube in the same way. from the jets inside the detergent dispenser drawer housing.
-
Page 40: Cleaning The Filter In The Water Inlet
Cleaning and care ^ First turn off the stopcock. Cleaning the filter in the water inlet ^ Unscrew the threaded union connecting the free end of the inlet The washing machine has a filter to hose to the stopcock. protect the water inlet valve. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more... -
Page 41: Problem Solving Guide
Problem solving guide With the help of the following notes, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. -
Page 42: The Following Fault Messages Appear In The Display And The Programme Stops
Problem solving guide The following fault messages appear in the display and the programme stops Remedy A Fault message Possible cause Drain – The water outlet is – Clean the drain filter and fault blocked or restricted. the drain pump. –... -
Page 43: The Following Fault Messages Appear In The Display At The End Of The Programme
A programme using a In order to prevent bacteria and temperature above 60°C unpleasant smells building up has not been run for a in the machine, run the long time. Maintenance programme using Miele machine cleaner or a universal powder detergent. -
Page 44: General Problems
Problem solving guide General problems Problem Possible cause Remedy The machine shakes The machine feet are not Level the machine (see during the spin cycle. level. "Installation and connection"). The laundry has not been The machine detected an Include both large and spun properly and is still imbalance during the final small items in the load as... -
Page 45: An Unsatisfactory Wash Result
– Before the next wash, run the washed laundry. break down the particles Maintenance programme of grease in heavily using Miele machine cleaner soiled laundry. or with a universal powder detergent. White residues The detergent contained –... -
Page 46: The Drum Door Does Not Open When You Press The Door Button
Problem solving guide The drum door does not open when you press the Door button Possible cause Remedy Insert the plug in the socket and switch on and/or The machine is not switch the machine on with the K button. connected to the electricity supply and/or is not switched on. -
Page 47: Opening The Drum Door In The Event Of A Blocked Drain Outlet And/Or Power Failure
Problem solving guide Opening the drum door in the Blocked drain outlet event of a blocked drain outlet If the drain outlet is blocked, up to and/or power failure 25 litres of water will be retained in the machine. ^ Switch the washing machine off. There is a lever behind the detergent Caution: if laundry has been drawer fascia panel. - Page 48 Problem solving guide Once the flow of water ceases: Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. To avoid loss of detergent, pour approx. 2 litres of water into the detergent dispenser drawer after cleaning the drain filter.
-
Page 49: After Sales Service
Miele service – your Miele Dealer or technicians during servicing work for testing purposes and for updating the – Miele (see back cover for contact machine's programme data. details). When contacting your Dealer or Miele, Guarantee... -
Page 50: Installation And Connection
Installation and connection Front view a Inlet hose with "Waterproof" system h Detergent dispenser drawer b Electricity supply cable i Drum door c - f Flexible drain hose (with j Access to drain filter, drain pump detachable swivel elbow) and emergency release g Control panel k Handle recesses for moving the machine... -
Page 51: Rear View
Installation and connection Rear view a Protruding lid for holding when e Transport clip for inlet and drain moving the machine hoses b Electricity supply cable f Safety cap for transit bars c Inlet hose with "Waterproof" system g Transport clip for inlet and drain hoses and for storing transit bars d Drain hose when not in use. -
Page 52: Installation Surface
1. Pull on the attached stopper, retaining clips (available from the Miele Spare Parts Dept). Otherwise 2. then use a screwdriver to release the there is the danger of the machine catch at the top. - Page 53 Installation and connection ^ Using the spanner supplied, turn the ^ Turn the right-hand transit bar 90°, left-hand transit bar 90°, then then ^ withdraw the transit bar. ^ withdraw the transit bar.
-
Page 54: Re-Fitting The Transit Bars
Installation and connection To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed. ^ Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. -
Page 55: Levelling The Machine
Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. -
Page 56: Building Under A Continuous Worktop/In A Kitchen Run
Installation and connection Washer and Dryer stack The fitting of building-under kits* A Miele tumble dryer can be stacked and stacking kits* must only be with the washing machine. A "WTV" undertaken by qualified and stacking kit* is necessary. competent persons, in accordance... -
Page 57: The Miele Waterproof System
Installation and connection The Miele Waterproof system 2) Electronic unit and washing machine housing The Miele Waterproof system protects the washing machine from water – Sump damage. Any leaking water is collected in a The system consists of three main sump in the base of the machine. -
Page 58: Connection To The Water Supply
Installation and connection Connection to the water supply The machine should be connected to the mains water supply in accordance The plastic casing of the safety with local and national safety valve contains electrical regulations. The German authorities do components. The Waterproof system not require it to have a non-return valve must only be connected to its own as the washing machine has been... - Page 59 Installation and connection Maintenance and care If you intend to unscrew the Miele Waterproof system hose from the stopcock it is essential to disconnect the machine from the electricity supply first. Only use a Miele Waterproof system hose should you need a replacement.
-
Page 60: Connection To The Drainage System
If required, the drain hose can be extended to a length of 5 m. The necessary parts can purchased from the Miele Spare Parts Department or a Adapter your Miele dealer. b Nut * For a delivery head of more than 1 m (up to a max. -
Page 61: Electrical Connection U.k
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out The fuse cover must be refitted when by a suitably qualified and competent changing the fuse, and if the fuse cover person, in strict accordance with is lost, the plug must not be used until a current national and local safety suitable replacement is obtained. -
Page 62: Technical Data
Technical data Height 850 mm Width 595 mm Depth 615 mm Depth with door open 975 mm Height for building under 820 mm Width for building under 600 mm Depth for building under 650 mm Weight 98 kg Capacity 7 kg dry laundry Voltage see data plate Connected load... -
Page 63: Consumption Data
Consumption data Load Consumption data Energy Water Duration in kWh in litres Short Normal Cottons 95°C 7.0 kg 2.20 2 h 29 min 60°C 7.0 kg 0.80 2 h 59 min 60°C 3.5 kg 0.66 2 h 29 min 40°C 7.0 kg 0.70 2 h 34 min... -
Page 64: Programmable Functions
Programmable functions To alter a programmable function The programmable functions are ^ You can see the different options used to alter the machine's available for a programmable electronics to suit changing function by pressing the Spin speed requirements. (W) button. Programmable functions can be altered at any time. -
Page 65: Total Usage
Programmable functions Total usage Extra quiet This gives the sum total of all energy If using your washing machine during and water consumption. quiet periods, you can reduce the noise levels even more. Energy If Extra quiet is activated, the machine This gives the sum total of all energy will activate Rinse hold and not spin. -
Page 66: Gentle Action
Programmable functions Gentle action Code Activating Gentle action reduces the The code prevents the washing drum action and is suitable for machine being used without your washing slightly soiled items more knowledge. gently. It should be activated for garments with a single bar under the To activate the code "bucket"... -
Page 67: Temperature Unit
Programmable functions Temperature unit Keypad tone You can chose for the temperature to An audible tone sounds each time a be displayed in button is pressed. °C/Celsius or °F/Fahrenheit. The machine is delivered with the The machine is delivered with keypad tone deactivated. -
Page 68: Standby Display
Programmable functions Standby display Memory To save energy, the display goes out The washing machine will store the and the indicator light for the Start/ most recently selected settings Stop button will start flashing slowly. (programme, temperature, spin speed and any extra options) in The display will always go out, memory once the programme has started. -
Page 69: Optional Accessories
Miele specialist detergents designed to suit the fabric being washed. Miele have also developed a "Outdoor wear" range of specialist CareCollection This specialist detergent will clean your detergents and conditioning products water-repellent outerwear with care. - Page 70 Fabric conditioner This liquid detergent is particularly suitable for cleaning coloured and dark The Miele fabric conditioner will give your laundry a fresh, natural fragrance. garments. The special formulation offers effective stain removal, even at It makes garments soft to handle and...
- Page 72 Alteration rights reserved/3111/W 5800 HomeCare XL M.-Nr. 09 153 110 / 00...