3.5-Inch Sas Jbod Enclosure (2) - NEC 2U SAS JBOD Enclosure Configuration Manual

CONFIGURATION GUIDE
1.5 2U 3.5-inch SAS JBOD Enclosure (2)
Category
Storage Controller
Required
Cable
1 to 2 Required
Enclosure
1 to 2 Required
Bezel
Drive
12 slots
available
NOTE:

Storage controllers must be compatible with the server connected.

The drive enclosures connected to one storage controller must be identical.

One drive enclosure can be connected to one port of storage controller.

Four or more disk drives must be installed.

All hard drives within a RAID array should be of the same capacity and rotation speed.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.

Any of RAID arrays cannot be used as a boot device.
NEC Corporation
–
2U SAS JBOD Enclosure
Product Name / Description
RAID Controller (2GB, RAID0/1/5/6)
LSI MegaRAID SAS 9380-8e
RAID0/1/5/6/10/50/60, 2GB, Ext. 8, PCIe 3.0 x8, SAS 12Gb/s,
SATA 6Gb/s,
Flash cache protection modules included
External SATA Cable
2 m, 1 x SFF-8088 to 1 x SFF-8644
2U 3.5-inch SAS JBOD Enclosure
12 x 3.5-inch Hot-plug hard drive bays
Front Bezel
For N8192-101F/102F
1TB 7.2K Hot Plug 3.5-inch NL SAS HDD
1 x 1 TB NL SAS HDD, 3.5-inch, 6Gb/s, 7,200 rpm
2TB 7.2K Hot Plug 3.5-inch NL SAS HDD
1 x 2 TB NL SAS HDD,32.5-inch, 6Gb/s, 7,200 rpm
3TB 7.2K Hot Plug 3.5-inch NL SAS HDD
1 x 3 TB NL SAS HDD, 3.5-inch, 6Gb/s, 7,200 rpm
4TB 7.2K Hot Plug 3.5-inch NL SAS HDD
1 x 4 TB, NL SAS HDD, 3.5-inch, 6Gb/s, 7,200 rpm
Revision 4.0 – July 24, 2015
Part Number
N8103-179
K410-322(02)
N8192-102F
N8192-302F
N8192-505
N8192-506
N8192-507
N8192-509
16