Ip Traffic Flow When Issuing Ping 192.168.13.1 On Node 6; Ip Traffic Flow When Issuing Ping 192.168.13.1 On Node 10 - IBM 9077 Get Connected

SP Switch
node 1
Adapter
192.168.13.1
255.255.255.0
Figure 61. IP Traffic Flow When Issuing ping 192.168.13.1 on Node 6
Figure 63 on page 196 shows the IP traffic flow when issuing the
on node 10 in SP21. All packets are first forwarded to the SP
192.168.13.1
Switch Adapter card with IP address 192.168.14.129 corresponding to the
routing settings. From this SP Switch Adapter card all packets are forwarded
via HIPPI connection to the only SP Switch Adapter card in GRF 400, which
forwards the traffic to node 1 in SP2. The way back follows the same route.
The SP Switch Adapter card with IP address 192.168.14.129 has no problem
delivering IP packets to node 10 that is in the same subnet.
192.168.13.1
255.255.255.0
SP Switch
node 1
Adapter
Figure 62. IP Traffic Flow When Issuing ping 192.168.13.1 on Node 10
GRF 400 GRF 1600
HIPPI HIPPI
GRF 400 GRF 1600
HIPPI
HIPPI
Single RS/6000 SP and Single SP Switch Router
192.168.14.4
255.255.255.128
SP Switch
Adapter
node 6
SP Switch
192.168.14.6
Adapter
255.255.255.0
192.168.14.129
255.255.255.128
ping
192.168.14.4
255.255.255.128
192.168.14.130
SP Switch
255.255.255.0
Adapter
node 10
SP Switch
Adapter
192.168.14.129
255.255.255.128
195