Track Copy; Track Clear; Track Page Copy - Elektron Octatrack DPS-1 User Manual

PATTERNS
Select the pattern you want to clear. Press and hold [FUNCTION]. Then press [PLAY] to
clear the pattern. A message "CLEAR PATTERN" will be shown in the display.
The clear pattern operation can be undone by pressing [FUNCTION] + [PLAY] directly
after performing it. A message saying "UNDO PATTERN" will be shown in the display.

TRACK COPY

When copying the contents of a track the note trigs, parameter locks, machine assignment
and FX assignments will be copied to the destination track. Before performing a track copy
operation, make sure you are in GRID RECORDING mode. If not, press [REC].
Select the track you want to copy. Press [FUNCTION] + [REC] to perform the copy opera-
tion. The message "COPY TRACK" will be shown in the display. Select the destination
track to which you want to paste the copied content. Paste the data by pressing [FUNC-
TION] + [STOP]. A message saying "PASTE TRACK" will be shown in the display. Pasting
a track overwrites any previous note trigs, parameter locks, machine and FX assignments.
The paste track operation can be undone by pressing [FUNCTION] + [STOP] immediately
after performing it. A message saying "UNDO TRACK" will be shown in the display.

TRACK CLEAR

Clearing a track will remove all note trigs from the active track. Before performing a track
clear operation, make sure you are in GRID RECORDING mode. If not, press [REC].
When you have selected the track you wish to clear, press [FUNCTION] + [PLAY] to clear
the track. The message "CLEAR TRACK" will appear.
The clear track operation can be undone by pressing [FUNCTION] + [PLAY] directly after
performing it. The message "UNDO TRACK" will be shown in the display.

TRACK PAGE COPY

A track page is one of the up to four pages of sequencer steps a pattern can contain. Cop-
ying a track page includes all note trigs and parameter lock settings of the track page.
Before performing a track page copy operation, make sure you are in GRID RECORDING
mode. If not, press [REC].
Select the track page you want to copy by pressing the [PATTERN PAGE] key. Hold the
[PATTERN PAGE] key and press [REC] to copy the track page. A message saying "COPY
PAGE" page will appear. Select the track page you want to paste the copied page to by
pressing the [PATTERN PAGE] key. Paste the data by holding [PATTERN PAGE] while
pressing the [STOP] key. A message saying "PASTE PAGE" will be shown in the display.
Pasting a track page overwrites any previous notes, data and parameter locks.
The paste track page operation can be undone by pressing [PATTERN PAGE] + [STOP]
directly after performing it. The message "UNDO PAGE" will be shown in the display.
TRACK PAGE CLEAR
It is possible to clear a track page from all note trigs. Before performing a track page clear
operation, make sure you are in GRID RECORDING mode. If not, press [REC].
Select the track page you want to clear by pressing the [PATTERN PAGE] key. Clear the
track by pressing [PATTERN PAGE] + [PLAY] to clear the track. The message "CLEAR
PAGE" will appear.
52