Samsung RF23HSESBSR User Manual page 15

RE-ASSEMBLING THE
FREEZER DOOR
To reattach the drawer after you have moved the
fridge to its final location, assemble the parts in
reverse order.
LEVELING THE
REFRIGERATOR
Make sure the refrigerator is level so that you can
make final adjustments.
Use a level to test if the refrigerator is level both
side to side and back to front.
If the refrigerator is not level, you will not be able
to get the doors perfectly even, which may cause
moisture condensation and increased energy bills.
Below is an example of how to level the
refrigerator if the left side of the refrigerator is
lower than the right side.
How to level the refrigerator
1. Open the freezer drawer and remove the lower
basket.
2. Remove the leg cover to adjust the leg.
3. Insert a flat-blade screwdriver (-) into the notch
on the left control lever, and turn it counter-
clockwise or clockwise to level the refrigerator.
(You turn the lever clockwise to lower the
refrigerator and counterclockwise to raise it.)
Flat-blade screw
driver (-)
DA68-03022A-05.indb 15
Control Lever
English - 15
CAUTION
To prevent the refrigerator from tipping over and
causing personal injury or property damage, both
control levers must be firmly touching the floor.
CAUTION
If the refrigerator is on an uneven floor, it may tilt.
To prevent this, adjust the legs so they contact
the floor firmly.
If the right side is lower, perform the same
procedure, but with the right control lever.
It is difficult to remove the front leg
cover from the refrigerator, so we do not
recommend making small adjustments
with the control lever.
Instead, refer to the next page for the best
way to make minor adjustments to the
doors.
2015. 2. 11. 9:34