Table of Contents
Advertisement
GENERAL
STEERING COLUMN
SWITCHES
REMOVAL
Disconnect the battery.
Remove:
- the steeri ng wheel
- and both steering column covers
Disconnect switch wiring plugs.
Remove the screw.
Slide the switch assembly off the column.
Both
switches
may be removed
and replaced
separately.
I
I
,]
-j
"-I
I
f.'j
t
1
)
\
I
__
J
D1-6
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the 1987-1989 LeSharo and is the answer not in the manual?
Questions and answers
how do i unlock the wheels in the front . RV starts but it wont turn like their seazed left or right..
To unlock the front wheels of a 1987-1989 Winnebago LeSharo that won't turn, check the steering wheel lock and alignment. Ensure the steering wheel is in the "steering straight ahead position" with spokes horizontal. If the wheel is locked, try turning the key in the ignition while gently moving the steering wheel side to side. If alignment issues are suspected, inspect the front axle parallelism and toe adjustments. If mechanical issues persist, check the lower suspension arms and steering components for any obstructions or damage.
This answer is automatically generated
@Mr. Anderson the key is in the dash board not in steering column
i raised up the front end with hydrolics to see if that help free the locking mechanism and nothing the rv starts but it wont free up steering column
To fix the steering column locking mechanism on a 1987-1989 Winnebago LeSharo, follow these steps:
1. Check for Sticking or Hard Spots – If the steering column is sticking or has hard spots, it may be due to incorrect plunger adjustment or misaligned steering components.
2. Adjust the Steering Box Plunger – Refer to the JS-S section for proper adjustment.
3. Inspect the Steering Column Assembly – Disconnect the intermediate shaft from the steering box and check if the steering wheel, top shaft, and intermediate shaft turn easily.
4. Lubricate or Replace Bushings – If necessary, withdraw the assembly and lubricate or replace the bushings to ensure smooth movement.
5. Align the Double Universal Joint – Set the front wheels straight and turn the shafts so that the double universal joint pins are at right angles to the intermediate shaft and top shaft.
Following these steps should resolve issues with the steering column locking mechanism.
This answer is automatically generated
I need to relace house battery. Was told to get a 31 Everstart, is that correct? Any other recommendations? 91 Winn. Lesharo