Samsung 750 User Manual page 110

Press the POWER button on the remote control.
You can also use the POWER button on the TV.
T
nOng the TV 0
and Off Memorizing the Channels
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the CH
(3
or CH
(3
button to scan
through the channels. This eliminates the need to change
channels by entering the channel digits. There are three
steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding and deleting
channels (Channel Lists).
Viewing the Displays and Menus
Viewing the Display
Press the INFO button on the remote control.
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
...
~.....
.-,-.--=-'
v....... . .
~20dJ
~
......._ .._ ..0 .._ ...
Viewing the Menus
With the power on, press the MENU button.
The main menu appears on the screen. The menu's
left side has icons: Picture, Sound, Channel,
Setup, Input, Application.
Press the'" or T button to select one of the icons.
Then press the ENTER button to access the icon's
sub-menu.
Press the EXIT button to exit.
English - 8
Storing Channels
In
Memory
(Automatic Method)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
II
Press the MENU button to display the menu.
Press the'" or T button to select Channel, then
press the ENTER button.
Press the'" or T button to select Auto Program,
then press the ENTER button.
Auto Program
Select
the-antenna
source to memorize-
-~
Air
~
Cable Start
Aulo Start
: Move
(?
Enter .:;. Retum
Press the ... or ,. button to select an antenna
connection, then press the ENTER button.
~
e
_~
Cab e Cab e antenna s gna
Auto' A rand Cllblp. :mtenpa gna s