Figure C-3: Supported Openamip Commands; Table C-2: Messages Sent From The Vsat Modem To The Acu (Examples - COBHAM Sailor 900 VSAT Installation Manual

Protocol
The SAILOR 900 VSAT ACU supports all OpenAMIP commands except the X command
which is optional. All the supported OpenAMIP commands are shown in the following
figure.
Messages sent from VSAT
S -15.000000 0.000000
0.000000
H 1451.815000 1.905000
P H V
B 11250.000000
12800.00000
T 1403.290000 0.618000
A 15
W 300
L 1 1
K 90.000000

Table C-2: Messages sent from the VSAT modem to the ACU (examples)

98-138976-C

Figure C-3: Supported OpenAMIP commands

modem
Longitude, Max_lat, Pol_skew
Hunt_frequency, Hunt_bandwidth
Rx_polarity, Tx_polarity
Rx-lcl_osc, Tx_lcl_osc
Tx_frequency, Tx_bandwidth
Keepalive_interval in mS [ACU: s message]
latlong_interval in seconds [ACU: w message]
Rx lock, Tx allowed
Max_skew
Appendix C: VMU settings
OpenAMIP setup for iDirect iNFINITI & Evolution
Explanation
C-5