Selecting Built-In Designs - Janome Memory Craft 350E Instruction Manual
Hide thumbs
Also See for Memory Craft 350E:
- Brochure (2 pages) ,
- Instruction book (52 pages) ,
- Instruction manual (52 pages)
Table of Contents
Advertisement
Janome 350E Instruction Manual
r
Built-in Designs
Hoop Size A(F): 126
1 10 mm
X
1
2
5
6
Mode
w
q
Hoop Size A(F): 126 x 110mm
Ready to Sew
Mode
y
www.aaasewing.com
1/14
3
4
A Z
7
8
e
t
A Z
Jog
ST
25
Selecting Built-in Designs
The pattern selection window for the built-in designs will
appear when the machine is turned on.
There are 100 ready-to-sew designs available in
this category.
You can also open design files saved in the internal
memory.
Press the Built-in/Saved
the built-in designs and saved designs.
q Built-in/Saved key
To select the embroidery design, press the desired
pattern selection key.
w Pattern selection keys
Press the Next page key to display the designs on the
following pages.
There are 14 pages of designs grouped by the hoop
size.
e Next page key
r Hoop size
When you press the Pattern selection key, the screen
will show a massage advising you the hoop to be used.
Press the Return key and the Ready to Sew screen
will open.
t Return key
y Ready to Sew screen
MC350E Owners Manual/ User Guide
Janome Embroidery Machine
key to switch between
- Quick Links:
- Usb Memory
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Memory Craft 350E and is the answer not in the manual?
Questions and answers
How do I change the bobbin during embroidering?
To change the bobbin on a Janome Memory Craft 350E while embroidering, follow these steps:
1. Stop the Machine – Pause embroidery before changing the bobbin.
2. Raise the Presser Foot – Lift the presser foot to allow access.
3. Remove the Bobbin – Open the hook cover plate and take out the empty bobbin.
4. Wind a New Bobbin – Wind thread onto a new bobbin if necessary.
5. Insert the Bobbin – Place the new bobbin into the bobbin case, ensuring proper threading.
6. Close the Hook Cover – Securely close the cover plate.
7. Resume Embroidery – Lower the presser foot and continue embroidering.
Always unplug the machine when making adjustments for safety.
This answer is automatically generated