Unpacking And Installation; Unpacking; Installation - LevelOne FSW-1610TX User Manual

U
NPACKING AND
This chapter provides unpacking and setup information for
FSW-1610/2410TX.

Unpacking

Open the shipping cartons of the Switch and carefully unpacks its
contents. The carton should contain the following items:
One FSW-1610/2410TX
One AC power cord, suitable for your area's electrical
power connections
Four rubber feet to be used for shock cushioning
Screws and two mounting brackets
This User Manual
If any item is found missing or damaged, please contact your local
reseller for replacement.

Installation

The site where you install the Switch stack may greatly affect its
performance. When installing, consider the following pointers:
Install the Switch in a fairly cool and dry place. See Specifications
for the acceptable temperature and humidity operating ranges.
Install the Switch in a site free from strong electromagnetic field
generators (such as motors), vibration, dust, and direct exposure to
sunlight.
Leave at least 10cm of space at the front and rear of the hub for
ventilation.
I
NSTALLATION
6