Using Easy Mode - NTT docomo foma p703i? User Manual

When you finish operating the menu
When you finish setting function, the selection display for the lower
sub-menu item comes up (the Stand-by display returns in some
cases).
When you finish setting the function, press
operation and the Stand-by display returns (except during Multitask).
To cancel the menu operation
Press
The contents of the setting are abandoned and the Stand-by display or the
former display returns. (Depending on the setting item, the confirmation
display appears asking whether to abandon the setting contents.)
You can press to return to the previous operation.
When the "YES/NO" selection display appears
1. Press to highlight "YES" or "NO".
2. Press ( ).

Using EASY Mode

"EASY Mode" is a mode that has enhanced the operability with
fewer operation steps than those in Normal Mode.
. This ends the menu
Basic functions are focused on to appear on the display.
In this manual, the operating procedures are given only in Normal Mode.
After selecting a menu item in EASY Mode, see the respective pages of
each function.
Switch to EASY Mode
You can switch between Normal Mode and EASY Mode from the Main menu.
From the Stand-by
display, press
Main menu in
For Reset Settings
Normal Mode
Confirm the deactivation.
Select "YES" to set "Character size" of "i-mode settings" and "Mail
settings" to "Large" and to set "Thickness" of "Font" to "Bold".
Even when you release EASY Mode, either of the settings does not
return. When "Large" or "Bold" has already been set, the confirmation
display does not appear.
Confirm the setting.
.
YES
NO
Main menu in
EASY Mode
Confirm the
character setting.
To page 36
Next Page 35