Error Codes - Canon EOS 700D Instruction Manual

Error Codes

Error number
Countermeasures
Number
Communications between the camera and lens is faulty. Clean the Communications between the camera and lens is faulty. C Communications between the camera and lens is faulty. C
lens contacts.
01
Clean the electrical contacts on the camera and lens or use a
Canon lens (p.17, 20).
Card cannot be accessed. Reinsert/change card or format card Card cannot be accessed. Reinsert/change card or forma Card cannot be accessed. Reinsert/change card or forma
with camera.
02
Remove and insert the card again, replace the card, or format Remove and insert the card again, replace the card, or format Remove and insert the card again, replace the card, or format the
card (p.31, 48).
Cannot save images because card is full. Replace car Cannot save images because card is full. Replace car Cannot save images because card is full. Replace card.
04
Replace the card, erase unnecessary images, or format the card Replace the card, erase unnecessa Replace the card, erase unnecessa
(p.31, 268, 48). (p.31, 268, 48). (p.31, 268, 48).
The built-in flash could not be ra The built-in flash could not be ra The built-in flash could not be raised. Turn the camera off and on
again.
05
Operate the power switch (p.34).
Sensor cleaning is not possible. Turn the camera off and on
again.
06
Operate the power switch (p.34).
10, 20, Shooting is not possible due to an error. Turn the camera off and
30, 40, on again or re-install the battery.
50, 60,
Operate the power switch, remove and install the battery pack
70, 80,
again, or use a Canon lens (p.34, 30).
99
* If the error still persists, write down the error number and contact your
nearest Canon Service Center.
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
Error Message and Solution Error Message and Solution Error Message and Solution
the camera and lens or use a the camera and lens or use a
337