Efm Oam Commands; Set Efmoam - Case XLR 550 Manual

Confirmation
See also,
Examples
[Example 9-5] show MAC address filter entries
XLR550> (enable) show filter mac
MAC Address
----------------- -------------
00:d0:84:11:12:13 drop
00:d0:84:11:12:14 forward-to-cpu
XLR550> (enable)
Output Fields
keyword
MAC Address
Filter Action
4.10

EFM OAM Commands

This section describes a list of commands that configure and display information about OAM
(Operation, Administration and Maintenance) defined in EFM (Ethernet in the First Mile) Standard.
4.10.1

set efmoam

To configure information about EFM OAM.
Usage
set efmoam { enable | disable }
set efmoam loopback { enable | disable }
Arguments
keyword
efmoam
loopback
Confirmation
See also,
Revision 1.3a
XLR 550 Manual
"set filter mac", "clear filter
Filter Action
Description
The specific MAC address.
Drop or Forward to the CPU the specific MAC address.
Description
Enable or Disable EFM OAM function.
Enable or Disable EFM OAM Loopback mode.
It enables the remote device to return all frames except OAM
frames.
This command is effective only on the active device, typically
central office device.
efmoam".
"show
mac".
Page 57