Transport And Shipping Of Batteries - Genny Mobility GENNY 2.0 URBAN User Instruction Manual

User instruction Manual
Document code
03-09-12_UIMG2 Manual ENG
HOW TO DISPOSE OF PACKING MATERIALS
The polyethylene and cardboard packaging can be disposed of without having to
shred it into small pieces. Just separate out the main parts according to the
chemical/physical nature of the materials, and load them onto the transport vehicle for
scrapping (respecting the general principles of differentiated waste collection).
Dispose of the materials in compliance with the applicable regulations, seeking advice
from the delegated authorities and/or the assistance of specialist companies authorized
for waste sorting/waste disposal. Make sure that plastic; metals and electric components
are properly separated for subsequent obligatory waste sorting.
The employer must be aware of the statutory legislation in force in the country of
use, and must comply with such provisions.
The act of abandoning the machine and electrical equipment in the environment is
forbidden, and may be subject to penalties.
Only at this point should you remove any packaging from the machine, bearing in
mind that the various materials/components which cannot be reused for future repacking
(in the case of transfer to another worksite) must be disposed of in compliance with
statutory legislation, seeking advice from the delegated authorities and/or the assistance
of specialist companies authorized for the disposal of pollutant or recyclable waste.
Warning - pollution hazard: do not dispose of the packaging materials in the
environment; retain them for any future transport needs or consign them to a recycling
company.
The evaluation and management of the packaging material for purposes of biological
compatibility are the duty and responsibility of the user.

5.3.4. TRANSPORT AND SHIPPING OF BATTERIES

If you are transporting your machine, protect the Batteries to avoid damage during shipment. Do not expose the
Batteries to direct heat or moisture, and avoid heavy vibration during transportation.
Do not use or transport a Battery if the casing breaks open, leaks any substance, becomes excessively
hot, or if you detect an unusual odor.
Do not handle a damaged or leaking Battery unless you are wearing disposable rubber gloves, eye
protection, and are in a well-ventilated area. Dispose of the rubber gloves and damaged Battery
properly in accordance with regulations governing disposal of toxic materials.
Pag. di Rev. SAVE DATA
6 13 00 23/07/13
PRINT DATA
23/07/13