Setting The Flash - HP Photosmart R817 User Manual

Ofrecido por www.electromanuales.com

Setting the Flash

To select a flash setting, press
highlight the desired flash mode, then press
Setting
Auto Flash (Default) The camera measures the light level and uses
Red-Eye
Flash On The camera always uses flash. If the light is behind
Flash Off The camera does not use flash. Use this setting to
Night
If the Flash setting is anything other than the default, the icon
for the setting appears in the Live View screen. The Flash
setting remains in effect until it is changed again, or you turn
the camera off. To save changed settings, use My Mode (see
page 56).
Description
the flash if necessary.
The camera measures the light level and uses the flash
with red-eye reduction (see page 48) if necessary.
your subject, use this setting to increase the light on the
front of your subject. This is called fill-flash.
capture poorly lit subjects beyond the flash range or to
capture existing-light scenes. Exposure times may be
increased, so set the camera on a tripod or stable
surface to avoid blurry images from camera shake.
The camera uses the flash with red-eye reduction (see
page 48) if necessary to illuminate objects in the
foreground, then continues to expose as if the flash had
not been used, to gather the light. Exposure times may
be increased, so set the camera on a tripod or stable
surface to avoid blurry images from camera shake.
Taking Pictures and Recording Video Clips
, use the buttons to
.
47