HEATRAY IRH-E ELECTRIC SERIES Product Manual

INFRARED RADIANT HEATING - ELECTRIC SERIES
a.
b.
c.
CELMEC INTERNATIONAL PTY LTD ABN 66514 732 689
Head Office & Export Enquiries: Tel: +613 9555 3667 Fax: +613 9555 9723
2 Powlett Street, Moorabbin, PO Box 3093, Moorabbin East LPO, Vic. 3189 Australia.
HEATRAY
PUBLICATION IRH-E 010111-2US
PRODUCT MANUAL
FOR INDOOR AND OUTDOOR PERMANENT STRUCTURES
This appliance shall be installed in accordance with:
- Manufacturer's Installation Instructions
- Local Requirements for Electrical Equipment
- Municipal Building Codes
- Any other relevant Regulatory Regulations
This appliance must be installed by an authorised person and all
electrical work must be carried out by a qualified electrician to validate
the warranty.
The appliance is not intended for use by young children or infirm persons
without supervision. Young children should be supervised to ensure that
they do not play with the appliance.
The heater must not be located immediately below a socket outlet.
The fixed wiring shall incorporate all means for disconnection from the
supply, having an air gap contact separation in all active (phase) conductors,
all done in accordance with local wiring rules.
®
IRH-E
IRH-E HEATERS
IMPORTANT
heatray
®
Infra-Red Radiant Heater IP65
3179365