Disassembly; Disassembly Flow; Cover - Sony MEX-XB100BT Service Manual

• This set can be disassembled in the order shown below.
3-1.

DISASSEMBLY FLOW

SET
FRONT PANEL SECTION
Note: Illustration of disassembly is omitted.

3-2. COVER

(Page 25)
3-3. SUB PANEL ASSY
(Page 26)
3-4. CD MECHANISM DECK (MG-101CF-188)
(Page 26)
3-6. MICROPHONE CONNECTION CABLE (MCN1)
(Page 27)
3-7. MAIN BOARD BLOCK
(Page 28)
3-8. AMP BOARD
(Page 29)
Note: Follow the disassembly procedure in the numerical order given.
3-2. COVER
N
This unit locates the heat sink on the left side.
When touching this unit, be careful not to
touch the heat sink on the left side of the unit.
heat sink
Note: When installing the cover,
check that three bosses are
all locked.
OK
Boss is locked.
NG
Boss is unlocked.
SECTION 3

DISASSEMBLY

5 cover
4 three claws
3 three bosses
3-10. HOW TO INSTALL THE KNOB (VOL) (SV) ASSY
(Page 30)
3-11. SERVICE POSITION
(Page 31)
3-5. ANTENNA BT (BT1)
(Page 27)
3-9. TUNER UNIT (TUX-DSP04)
(Page 30)
1 two bosses
2 two bosses
MEX-XB100BT
Note: When installing the cover, check
that two bosses are all locked.
OK
Boss is locked.
NG
Boss is unlocked.
Note: When installing the cover, check
that two bosses are all locked.
OK
Boss is locked.
NG
Boss is unlocked.
25