2. ASSEMBLY & DISMANTLING INSTRUCTIONS..2 3. CIRCUIT DIAGRAMS………………..……………. 5 4. CONSTRUCTIONAL DIAGRAMS………..…………. 7 5. ACCESSORIES………………………………...……..10 6. PARTS LIST CV-600……………………………...…... 11 7. PARTS LIST CV-610……………………………...…... 12 8. PARTS LIST CV-710……....…...…………… 13 9. ACCESSORIES PARTS LIST……....…...… 14 10. FINAL TESTS…….........………… 4...
Cylinder Vacuum Cleaners 1. Overview These vacuum cleaners utilise a double plastic casing. The interior consists of compartments for the storage of paper or textile filters and a motor. Between the rear of the motor and case there is a plastic pressing which serves to reduce noise caused by air flow.
Page 3
To reassemble, insert the projection on the flap into the top case and clip the ‘U’ pieces on to the projections opposite the retaining clips. Press down the flap until a click is heard. 2.2 Dismantling and Reassembling the Lid Dismantle the panel as described above, remove the hinge pins, then remove the top accessory lid followed by the dust compartment lid by sliding it out...
Circuit Diagrams Constructional Diagrams Accessories for Hitachi CV-600/610/710 List of spare parts for Hitachi CV-600 List of spare parts for Hitachi CV-610 List of spare parts for Hitachi CV-710 Accessories Parts List...
Page 5
Check the noise level at the motor. Check the operation of the switch button function by switching on and off 3 times. Check the operation of the winder function by retracting the cord 3 times. Check for the presence of foreign matter, this could cause damage to the motor.