Related Manuals for Hobart 1712
Summary of Contents for Hobart 1712
- Page 1 SLICERS Model 1712 02/95 UK. SERVICE TRAINING CENTRE Warning this information is for HOBART STILL trained personnel only. Reproduction of this information is prohibited without the written consent of HOBART STILL.
-
Page 2: Table Of Contents
CARRIAGE TRANSMISSION - SERVICE ................3 CARRIAGE - SERVICE ......................4 WIRING DIAGRAM ........................5 02/95 UK. SERVICE TRAINING CENTRE Warning this information is for HOBART STILL trained personnel only. Reproduction of this information is prohibited without the written consent of HOBART STILL. -
Page 3: General Data
To engage lift lever "1". To disengage press lever use dirty or damaged wheels. "2" 02/95 UK. SERVICE TRAINING CENTRE Warning this information is for HOBART STILL trained personnel only. Reproduction of this information is prohibited without the written consent of HOBART STILL. -
Page 4: Blade Transmission - Service
NS-32-23 WS-07-50 274759 274760-1 274760-2 (neoprene) (neoprene) 02/95 UK. SERVICE TRAINING CENTRE Warning this information is for HOBART STILL trained personnel only. Reproduction of this information is prohibited without the written consent of HOBART STILL. -
Page 5: Carriage Transmission - Service
Order both these items in the case of replacement. Plugs OIL = EP 460 (284 ml) 02/95 UK. SERVICE TRAINING CENTRE Warning this information is for HOBART STILL trained personnel only. Reproduction of this information is prohibited without the written consent of HOBART STILL. -
Page 6: Carriage - Service
Only use White oil (Puremor 210) Hobart grade "J" Bushing - Liner 02/95 UK. SERVICE TRAINING CENTRE Warning this information is for HOBART STILL trained personnel only. Reproduction of this information is prohibited without the written consent of HOBART STILL. -
Page 7: Wiring Diagram
02/95 UK. SERVICE TRAINING CENTRE Warning this information is for HOBART STILL trained personnel only. Reproduction of this information is prohibited without the written consent of HOBART STILL.
Need help?
Do you have a question about the 1712 and is the answer not in the manual?
Questions and answers
My indexer won't turn
The indexer on the Hobart 1712 may not turn due to several possible reasons:
1. Safety Interlock Engaged – The machine will not operate if the knife guard cover is removed. Ensure the cover is properly in place.
2. Mechanical Obstruction – Check for any debris or buildup that may be preventing movement.
3. Transmission Issue – If the carriage transmission is stuck, verify if the diving key boss is properly engaged with the shaft. If the diving key is faulty, it may need replacement (Part #435543).
4. Lubrication Problem – Ensure that the carriage slide rods are properly lubricated using white oil.
If the issue persists, further inspection of the gears and transmission may be required.
This answer is automatically generated