Test Strip - NIPRO Diagnostics TRUEtrack Owner's Booklet

Test Strip

➀ Contact End - Insert into Meter with Contacts
(metallic blocks) facing up before adding sample.
➁ Sample Tip - Touch sample (blood or Glucose
Control) to edge of Tip.
Placement of Sample to Test Strip
Correct
• Allow sample (blood or Glucose Control
drop) to be drawn into Sample Tip.
Caution! Holding the Test Strip Sample Tip to the
Note: Do not apply blood or Glucose
Control to top of Test Strip.
• Do not smear or scrape drop with Test Strip.
• Do not apply more sample to Test Strip
after removing from drop.
Note: Do not insert Sample Tip with
sample into Meter for testing.
May damage meter.
Front of Test Strip
1
Incorrect
blood sample too long after the Meter
begins testing may cause inaccurate results.
11
2
Contacts
Face Up