Call Transfer - Panasonic KX-NCP500 Operating Manual

1.3.11 Call Transfer

SLT
During a conversation
OR
C.Tone
Press Recall/
hookswitch.
1.3.11 Call Transfer
–
Transferring to an Extension in the PBX
–
Transferring to an Outside Party Using the PBX Service
–
Transferring to an Outside Party Using the SIP Service
•
•
Transferring to an Extension in the PBX
To transfer
PT/PS
During a conversation
TRANSFER
Press TRANSFER.
42 Operating Manual
extension no.
Dial the other party's
extension number.
You can transfer a held call without talking, and go on-hook even if the transferred party
does not answer the call.
If a transferred call is not answered within a specified time, it will ring at a
preprogrammed extension, if set, or at your extension again. If you are off-hook at that
time, you will hear an alarm tone. If an outside call is not answered within a specified
time, it is automatically disconnected. (This feature is not available when transferring to
an outside party using the SIP service.)
For users of SIP Extensions:
–
Even if your telephone has a TRANSFER button, you cannot use it to transfer calls.
Please make sure to use the HOLD button.
–
The transfer operation for SIP Extension users may differ from the steps in this
section, and may vary depending on the type of telephone being used.
(DSS)
OR
C.Tone
extension no.
Press DSS or dial
extension number.
OR
Talk to the
Press Recall/
other party.
hookswitch.
Talk.
This step can be omitted.
On-hook.
On-hook.
Document Version 2013-05