1100 Palm Rest Assembly With Cables - Lenovo THINKPAD E40 Hardware Maintenance Manual

1100 Palm rest assembly with cables

For access, remove these FRUs in order:
v "1010 Battery pack" on page 78
v "1030 Optical drive or travel cover" on page 80
Table 18. Removal steps of palm rest assembly with cables
Note:
In models with the fingerprint reader, the sensor is attached to the palm rest
FRU. If the fingerprint reader has any defects, you can replace it by the
procedures given in this section, which are the same for a palm rest with or
without a fingerprint reader.
1
1
1a
Step Screw (quantity)
M2 × 8 mm, wafer-head, nylon-coated (5)
1
M2 × 5 mm, wafer-head, nylon-coated (1)
1a
M2 × 3 mm, wafer-head, nylon-coated (1)
2
2
1
1
1
Removing and replacing a FRU
1
2
Color Torque
Black 0.181 Nm
(1.85 kgfcm)
Black 0.181 Nm
(1.85 kgfcm)
Black 0.181 Nm
(1.85 kgfcm)
93