Do you have a question about the Strike Force BTC-5HD and is the answer not in the manual?
Questions and answers
Roberts Bennett
January 25, 2025
Can’t get the camera to change capture modes. Stays on trail. Strike Force 850 HD
1 comments:
Mr. Anderson
February 10, 2025
To change the capture modes on the Browning Strike Force BTC-5HD camera, follow these steps:
1. Power On the Camera - Open the camera’s front cover. - Move the power switch to the "ON" position.
2. Enter the Settings Menu - Press the "MODE" button to access the camera’s menu.
3. Navigate to Capture Mode - Use the arrow buttons to scroll through the menu options. - Look for "Capture Mode" or a similar setting.
4. Select the Desired Mode - Press "ENTER" to modify the capture mode. - Use the arrow buttons to choose between available modes, such as: - Photo Mode (captures still images). - Video Mode (records video clips). - Time-Lapse Mode (captures images at set intervals).
5. Confirm the Selection - Press "ENTER" to save the selected mode.
6. Exit the Menu - Press the "MODE" button to exit and return to normal operation.
7. Test the Camera - Close the cover and place the camera in the desired location. - Trigger the camera to ensure it captures using the selected mode.
Following these steps will allow you to change the capture modes on your Browning Strike Force BTC-5HD camera.
Need help?
Do you have a question about the Strike Force BTC-5HD and is the answer not in the manual?
Questions and answers
Can’t get the camera to change capture modes. Stays on trail. Strike Force 850 HD
To change the capture modes on the Browning Strike Force BTC-5HD camera, follow these steps:
1. Power On the Camera
- Open the camera’s front cover.
- Move the power switch to the "ON" position.
2. Enter the Settings Menu
- Press the "MODE" button to access the camera’s menu.
3. Navigate to Capture Mode
- Use the arrow buttons to scroll through the menu options.
- Look for "Capture Mode" or a similar setting.
4. Select the Desired Mode
- Press "ENTER" to modify the capture mode.
- Use the arrow buttons to choose between available modes, such as:
- Photo Mode (captures still images).
- Video Mode (records video clips).
- Time-Lapse Mode (captures images at set intervals).
5. Confirm the Selection
- Press "ENTER" to save the selected mode.
6. Exit the Menu
- Press the "MODE" button to exit and return to normal operation.
7. Test the Camera
- Close the cover and place the camera in the desired location.
- Trigger the camera to ensure it captures using the selected mode.
Following these steps will allow you to change the capture modes on your Browning Strike Force BTC-5HD camera.
This answer is automatically generated