Maintenance & Adjustment; Specifications & Capacities; Engine Oil - Iseki TXG237 Operation Manual

TXG237
MAINTENANCE & ADJUSTMENT
SPECIFICATIONS & CAPACITIES

Engine Oil

Use equivalent in the appropriate SAE viscosity. Oil must meet of exceed; MILL-46152 requirements, API Service "CC".
Capacity(Crankcase and filter) ..........................................................................................................................2.6 L
Recommended Viscosity:
78F (25C) and Above ................................................................................................ SAE 30 W, 10W - 30
32- 78 (0-25C) ........................................................................................................... SAE 20 W, 10W - 30
Below 32F (0C) ......................................................................................................... SAE 10 W, 10W - 30
15W-40 may be used in ambient temperatures above -10C
Recommended Change Intervals:
Initial Oil and Filter Change ................................................................................................................. 50 h
Oil and Filter Change, Thereafter ........................................................................................... Every 150 h
Engine Coolant
Freezing Protection (Original Factory Fill) .........................................................................................................-34C
Recommended Coolant ............................................................................. 50/50 mixture ethylene glycol and water
System Capacity............................................................................... (Radiator Body 4L, Reserve Tank 0.6L) 4.6 L
Fuel Tank
Capacity .............................................................................................................................................................25 L
Fuel recommended, Above 4C ......................................................................................................... No.2 or No.2-D
Fuel recommended, Below 4C ......................................................................................................... No.1 or No.1-D
Transmission & Differential Housing (Including Hydraulic System)
Capacity: .........................................................................................................................................................11.0 L
Recommended Lubricant ........................................................... (ISEKI U.T.H Oil) Shell DONAX TD or equivalent
Recommended Change Interval: ...........................................................................................First 50 h, every 300 h
Front Axle
Capacity 4.2 U.S. qts (4.0 L)
Recommended Change Lubricant .................................................................... (Shell Spirax 80#EP) SAE 80 GL-4
Recommended Change Interval: .......................................................................... First 50 h, every 300 h thereafter
Grease Fittings
Grease Interval (All Fittings) .................................................................................................................... Every 50 h
Recommended Grease ................................................................................................... Lithium base grease No.2
NOTE: Change intervals stated above are for normal usage. Due to adverse operating conditions that may be
experienced (extremely dusty of muddy), change intervals may need to be more frequent.
52