Summary of Contents for GS Engineering B.V. GS 1010
-
Page 1: Operating Instructions
Instruction GS 1010 Operating Instructions GS 1010 GS Engineering B.V. manufacturer hydraulic sweepers... - Page 2 Instruction GS 1010 Manufacturer: GS Engineering B.V. manufacturer hydraulic sweepers Tel: 0031 (0)486-415370 Fax: 0031 (0)486-411325 E-mail: info@gsengineering.nl Machine: GS 1010 GS Engineering B.V. manufacturer hydraulic sweepers...
-
Page 3: Table Of Contents
Instruction GS 1010 Table of Contents General User Liability Guarantees offered Documentation Technical Data Safety Safety Symbols Safety Aspects Safety Devices Emergencies Non-advisable use The Sweeping Process Recommended application Engine 3.2.1 Starting the engine 3.2.2 Turning off the Engine 3.2.3 Refuelling Brush 3.3.1 Starting and stopping the brush... -
Page 4: General
It addresses all aspects that are of relevance to the operation and daily maintenance of the GS 1010. It also pays attention to important aspects in respect of technical maintenance. The operating instructions must be read carefully in order to use the machine correctly and safely. -
Page 5: User
1.1 User In these operating instructions, ‘user’ means: Anyone who is put into contact with the GS 1010 or parts thereof under normal operating conditions. The company or user has to make sure that each user is sufficiently qualified to handle this kind of machines and is able to comply with relevant provisions and safety aspects. -
Page 6: Guarantees Offered
The machine is used for other purposes than those it was designed and built for. 1.4 Documentation Each machine comes with: - the operating instructions for the GS 1010 - the operating instructions for the engine - warranty certificate GS Engineering B.V. -
Page 7: Technical Data
Instruction GS 1010 1.5 Technical Data Technical data of the GS 1010 Illustration 1 Sweeping width 101 cm Honda GCV160 4,2 kW (5,5hp) or Engine power Honda GX200 4,8 kW (6,5 hp) Transmission Hydrogear 1 forward/backward, continuous Speed adjustment 0 - 3.8 km/h... -
Page 8: Safety
Instruction GS 1010 2. Safety The GS 1010 has been manufactured in accordance with the regulations that are currently applicable. Nevertheless, this machine could cause dangers to man and machine if: it is not used in accordance with the operating instructions;... - Page 9 Instruction GS 1010 3. Applied to the case of the machine, on the side, "eye protection must be worn" 4. Applied to the case of the machine, near the switch with the indications: - "Arrow forward"(forward position of brush) - "Horizontal line" (neutral position) - "Arrow backward"...
-
Page 10: Safety Aspects
Instruction GS 1010 2.2 Safety Aspects Safety aspects and pictograms included in these operating instructions as well as the safety symbols on the machine must always be observed by the operator. The procedures laid down in the operating manual must always be executed in the correct order. -
Page 11: Emergencies
2.5 Non-advisable use It is not allowed to sweep materials that are dangerous to human health in any way whatsoever. It is advised not to drive the GS 1010 without tools. Do not use the sweeper in confined spaces. GS Engineering B.V. -
Page 12: The Sweeping Process
ATTENTION: GS 1010 is available with two different engines: Honda GX 200 Honda GCV 160 Check the engine's oil level each time before using the GS 1010. Type of engine oil: SAE 5W40 Capacity of the Honda GX 200 engine: 0.5 litre Capacity of the Honda GCV 160 engine: 0.45 litre... -
Page 13: Starting The Engine
Instruction GS 1010 Before the operator starts the engine, the machine must be checked and found in good order. Upon starting the engine, the brush drive must be turned off. First turn off the brush, otherwise unexpected and dangerous situations might arise. - Page 14 Instruction GS 1010 ATTENTION: Do not use the choke when the engine is hot or when the air temperature is high. 4. Take hold of the starter handle (see Illustration 3) and slowly pull until you feel resistance. Firmly pull the cord to get through the compression, avoid backfire and start the engine.
- Page 15 Instruction GS 1010 2. Push the adjusting handle towards the CHOKE position indicated by the choke symbol ( ) on the adjusting handle. (see Illustration 2) ATTENTION: Do not use the choke when the engine is hot or when the air temperature is high.
-
Page 16: Turning Off The Engine
Instruction GS 1010 4. Push the adjusting handle on the push bar towards the "turtle" (slow) or the "hare" (fast). (see Illustration 5) Illustration 5 3.2.2. Turning off the Engine The following procedure must be followed to turn off the Honda GX 200 engine: The engine can easily be turned off by turning the engine switch to OFF. -
Page 17: Refuelling
Instruction GS 1010 Follow the procedure below to turn off the Honda GVC 160 engine: Push the adjusting handle on the push bar until it reaches the STOP sign. (see Illustration 2) Illustration 2 Do not stop the engine by using the choke. This could cause backfire and could damage the engine. -
Page 18: Brush
Instruction GS 1010 Do not replenish the fuel tank in a confined space. Do not replenish the fuel tank when the engine is running. Wait at least two minutes for the engine to cool down before refuelling. Never turn on the engine when fuel has been spilled. Keep the engine away from the spilled fuel and avoid ignition sources. - Page 19 Instruction GS 1010 2. Put the handle on "neutral" for the neutral position, which also switches the brush off (see Illustration 2). It is indicated by the horizontal line on the sticker. (see Illustration 3) Illustration 2 Illustration 3 3. For reverse position, put handle on "backward". (see Illustration 4) The brush will now start to rotate in reverse direction.
-
Page 20: Configurations
Do never check the brush when the machine is running. 3.3.2 Configurations The GS 1010 has two different settings. The right setting will result in an optimum sweeping result. First of all, the distance between the brush and the surface to be swept can be adjusted: the brush height-setting. -
Page 21: Angle Adjustment Of The Brush
An illustration has been affixed to the push bar of the machine as shown on the following illustrations. The GS 1010 has three different movement positions: GS Engineering B.V. manufacturer hydraulic sweepers... - Page 22 Instruction GS 1010 1. Pull the handle towards you for the forward movement. The machine will now move forward. (see Illustration 1) Illustration 1 2. When the handle is left in the middle, the machine is in neutral. The machine will not move.
-
Page 23: Speed Adjustment
3.4.2 Speed adjustment The speed of the GS 1010 can be easily adjusted by using the turning knob on top of the push bar. (see Illustration 5) Illustration 5 GS Engineering B.V. - Page 24 Instruction GS 1010 To adjust the speed, turn the knob to the left (faster) or to the right (slower). (see Illustration 6) (Illustration 6) GS Engineering B.V. manufacturer hydraulic sweepers...
-
Page 25: Maintenance And Inspection
4.2 Maintenance after sweeping After sweeping, the machine can be cleaned with water. The use of a high-pressure spraying device is allowed. During cleaning, the engine of the GS 1010 must be turned off. During cleaning, the engine of the sweeper must be turned off. -
Page 26: Maintenance And Repairs
Instruction GS 1010 4.4 Maintenance and repairs Maintenance and repairs to the machine must be carried out by a mechanic. 4.4.1 Hydraulic system Maintenance and repairs to the hydraulic system must be carried out by a mechanic. The hydraulic hoses installed on the machine must be replaced once every 5 years. - Page 27 Instruction GS 1010 Check the engine's oil level each time before using the GS 1010. Type of engine oil: SAE 5W40 Capacity of the Honda GX 200 engine: 0.5 litre Capacity of the Honda GCV 160 engine: 0.45 litre For more detailed information about the engines of the GS 1010, please refer to the enclosed manuals of these engines.
-
Page 28: Accessories
Instruction GS 1010 5 Accessories 5.1 GS Collector Box The most commonly used accessory is the GS Collector Box. It is 101 cm wide. (see Illustration 1) The GS collector box is not included in the machine; however, you can choose to order it. - Page 29 Instruction GS 1010 2. Now you can lift the collector box and slide it on the mounting supports. (see Illustration 3) Illustration 3 Illustration 4 (The final result) The distance between the lower side of the collector box and the sweeping surface (ground clearance) can be adjusted by means of the turning handles.
- Page 30 Instruction GS 1010 To empty the collector box, follow this simple procedure: take hold of the handle of the collector box (the handle that points towards the push bar) and pull towards you. (see Illustration 7) The machine must be turned off when emptying the collector box.
-
Page 31: Other Optional Accessories
Instruction GS 1010 5.2 Other optional accessories 1. GS hydraulic side brush (see illustration 1) (Illustration 1) 2. GS snow plow 90 cm. (see Illustration 2) (Illustration 2) 3. GS manure scraper 85 cm or GS manure scraper 105 cm (see Illustration 3) (Illustration 3) GS Engineering B.V. - Page 32 Instruction GS 1010 4. GS skid chain (see Illustration 4) (Illustration 4) 5. GS sulky (see Illustration 5) (Illustration 5) 6. GS wide caster wheels (see Illustration 6) (Illustration 6) GS Engineering B.V. manufacturer hydraulic sweepers...
- Page 33 Instruction GS 1010 7. GS set of broad tyres 16x6.50x8 or GS exchange set tyres 16x6.50x8 (see Illustration 7) (Illustration 7) GS Engineering B.V. manufacturer hydraulic sweepers...
-
Page 34: Maintenance Dates
Instruction GS 1010 Maintenance Dates GS Engineering B.V. manufacturer hydraulic sweepers... -
Page 35: Ec Declaration
Instruction GS 1010 EC DECLARATION OF CONFORMITY FOR MACHINES (Directive 89/392/CEE, Annex II, paragraph A) Wilser Constructions Ravenstein Hereby declares that sweeper GS 1010 - conforms to the provisions of the Directive relating to machinery (directive 89/392/CEE, as amended lately) and the national legislation implementing this directive;...
Need help?
Do you have a question about the GS 1010 and is the answer not in the manual?
Questions and answers