Page 1
USER’S MANUAL version 1.1 English AMST-606 WIRELESS DOOR/WINDOW SENSOR...
Page 2
AMST-606 WIRELESS DOOR/WINDOW SENSOR A: Part 1 magnetic C: Battery Picture of an arbitrary COCO receiver switch compartment (not included) B: Part 2 magnetic D: Mounting point switch E: Switch time selector...
Page 3
AMST-606 WIRELESS DOOR/WINDOW SENSOR [1] Slide open the battery compartment and place [2] Turn the switch time selector to the "0" position. a battery in the recess of the battery holder with the "+" pole face up. Now slide the holder back into Only after a connection is made with the the product.
Page 4
[3] Activate the automatic search mode of the [4] Set both parts against one another so the COCO receiver (see the corresponding manual). arrows point toward each other. Now pull the parts away from each other to send an "on" signal.
Page 5
AMST-606 WIRELESS DOOR/WINDOW SENSOR [5] If desired, set a different "switch off" time: [6] Attach one of the parts to the door or window and the other to the frame. The arrows on the two “0”: The off signal is sent as soon as the two parts parts must point toward each other.
Page 6
Remarks Reminders • This product must be used in combination with at least one COCO receiver. The receivers that are used must automatically program themselves with the transmitted code (see manual of the concerned receiver). Receivers on which the letter code ("house code") must be programmed manually are not suitable for use with this product.
Page 7
If possible, submit this product for recycling after use. Do not dispose of the product with household trash. Warranty and copyright This device is covered by a 2-year warranty that begins on the day of purchase. Visit www.coco- technology.com/warranty for additional information. Reprinting of (portions of) this manual without...
Page 8
P.O. BOX 126 4760 AC ZEVENBERGEN THE NETHERLANDS www.coco-technology.com Declaration of Conformity Pan-Trade International BV declares that the COCO product, model: type designation AMST-606 WIRELESS DOOR/WINDOW SENSOR item number 74018 is in compliance with the essential requirements and other relevant provisions of directives R&TTE 1999/5/EC, EMC 2004/108/EC and LVD 2006/95/EC and is compatible with the standards EN 300 220- 1/3, EN 55015, EN 301 489-1/3 and EN 60950.
Need help?
Do you have a question about the AMST-606 and is the answer not in the manual?
Questions and answers