Async Setting; Bprivacy Mask Setting - Sanyo VCC-9400P Instruction Manual

CAMERA SETTINGS
A SYNC setting
Initial setting is internal synchronization (INT), so it does not need
to be set again. Follow the steps below to change the setting to
power source synchronization (L-L).
Power source synchronization (L-L) setting
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to select L-L for SYNC,
then press the ENTER button.
The L-L SETTING screen will appear.
ENTER
Available settings: 0 – 624
3
Use the joystick lever (d or c) to adjust the position of
the vertical synchronization indicator shown on the
screen.
The numerical value will change, allowing adjustment of
vertical synchronization.
4
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The CAMERA SETTING screen
will reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
English
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
L-L SETTING
(V SYNC PHASE)
0
PRESET OFF
MENU BACK
B PRIVACY MASK setting
Mask setting
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to select SET for PRIVACY
MASK, then press the ENTER button.
The PRIVACY MASK SETTING screen will appear.
3
Use the joystick lever (j or l) to move the cursor to SET
for MASK SET and press the ENTER button.
The MASK NO. SELECT screen will appear.
Note: When PASSWORD LOCK is ON, moving the cursor to
MASK SET and press the ENTER button to bring up a
password access screen. The password must be entered in
this screen.
4
Use the joystick lever (j or l) to move the cursor to SET
for DIRECTION and press the ENTER button.
The DIRECTION screen will appear.
Note: If no "*" mark appears next to the screen title "MASK NO.
SELECT", privacy masks cannot be set. Changing the
joystick lever angle so that the "*" mark appears will allow
setting of masks.
– 15 –
CAMERA SETTING
ENTER
SYNC
PRIVACY MASK
LENS
VIEW SETTING
PRIVACY MASK SETTING
ENTER
PASSWORD LOCK
PASSWORD CHANGE SET
MASK SET
MENU
MASK NO.SELECT *
ENTER
MASK 1
MASK 2
MASK 3
MASK 4
MASK 5
MASK 6
MASK 7
MASK 8
DIRECTION
PRESET
MENU
INT
SET ‚
SET ‚
1 ‚
OFF ‚
‚
SET ‚
BACK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SET ‚
OFF
BACK