Date / Time
Set the Date/Time displayed in idle mode. The default setting is "2008, 01/01 12:01
PM".
1. Press the menu/ok button.
. Press the 5 or 6 button to select DATE/TIME and press the menu/ok button, the
screen displays YEAR 2008.
. Input the correct last two digits of year (range: 00-99), press the menu/ok button
to confirm the setting and then enter month and date settings.
4. Input the correct date and month, the format is: date/month (date range: 01-
0/1, month range: 01-1), press menu/ok button to confirm the setting and
enter time setting.
5. Input the correct time, the format is: hour/minute (hour range: 01-1 and 00-,
minute range: 00-59), and set the "AM" or "PM" by pressing 5 or 6 button.
6. Press the menu/ok button to confirm the setting.
7. Press the
NOTE: If the value you input is over the range, you cannot enter the
next setting. Please re-enter the correct setting.
Registration
Register
Up to 4 cordless handsets can be registered to the same base.
1. Press the menu/ok button.
. Press the 5 or 6 button to select REGISTRATION and press the menu/ok button.
. Press the 5 or 6 button to select REGISTER and press the menu/ok button, the
screen displays ENTER PIN (default setting = 0000).
4. Input the correct PIN code and press the menu/ok button to begin registration.
The screen displays SEARCHING. Press and hold the mute/register button on the
base until the base screen displays REGISTRATION.
NOTE: While in SEARCHING mode, the handset is inoperable, wait
for mode to time out before use.
NOTE: If an incorrect PIN code is entered, registration will not
succeed. Handset screen displays WRONG PIN, after time out.
NOTE: If base is unable to register, NO BASE displays on the screen
and the registration process must be repeated.
button to return to idle mode.