Auto Channel Search; Memorizing The Channels & Setting Channels - Sinotec ST-29ME70H1 Operating Manual

Memorizing the Channels & Setting Channels

Auto Channel Search

PICTURE AUDIO
Auto Search
Manual Tuning
Fine-Tune
Color System
Audio System
Programme Edit
MOVE SELECT
Auto Search
50.75 MHz
Return
Manual Channel Tuning
PICTURE AUDIO
Auto Search
Manual Tuning
Fine-Tune
Color System
Audio System
Programme Edit
MOVE SELECT
Manual Tuning Frequency 868.25 MHz Current CH 1
Return
Note: Be sure to select the TV input source before operation.
CHANNEL SETTING
1
2
AUTO
DK
3
RETURN
Programme(s) 5
4
If desired programs can not be found by Auto Search, you can make use of
Manual Tuning to search programs manually.
CHANNEL
SETTING
1
AUTO
2
DK
3
RETURN
Left/Right Search
4
Press MENU and the main menu screen displays.
Press 3 or4 to select the CHANNEL menu and press 6
access the menu.
Highlight the Auto Search and press 4
search for all available channels and stores them into memory. It may
take several minutes, please wait.
If you want to stop the auto search, press the MENU button.
Use number buttons to select a current position number.
Navigate to the CHANNEL menu and press 6
menu.
Press 5 or 6 to select the Manual Tuning and press 4
access.
Press4 for the unit to search towards higher frequency;
Press3 for the unit to search towards lower frequency.
The search stops when a program is found and this program will be
stored in the current channel position. If you want to stop the
search, press the MENU button.
14
or OK to
or OK to begin the auto
or OK to access the
or OK to