Set Clock; Weight Sensor - Whirlpool JQ 280 Instructions For Use Manual

T
HIS MICROWAVE OVEN USES THE WEIGHT SENSOR TECHNOLOGY
and Steam); when you select one of these 6thSense functions, you just need to select type of
food you want to process and press start: the microwave automatically detects the weight of
food and set the cooking time accordingly.
D
URING THE SENSING PHASE
weight calculation process (see sample below, from 6th Defrost function).
WEIGHT SENSING CALIBRATION
Weight sensor technology requires a Calibration process before fi rst use. Suggest user to make
the calibration once a year.
T
HE CALIBRATION PROCESS MUST BE DONE
P for few seconds the Stop TurnTable button.
RESS AND HOLD
T
HE CALIBRATION PROCESS
-- weight icon blinking
-- calibration progress bar
W
HEN THE CALIBRATION PROCESS
10

SET CLOCK

W
HEN THE APPLIANCE IS FIRST PLUGGED IN
product will enter clock setting. If the clock is not set, the display
will remain ":" instead of the clock.
NOTE:
YOU CAN
standby mode to access the clock setting mode.

T
URN THE

P
RESS KNOB BUTTON

T
URN THE

P
RESS THE KNOB BUTTON AGAIN
T
HE CLOCK IS SET
I STOP is pressed in clock setting mode, the clock will be disabled
F
the display shows ":".
N : K
OTE EEP THE DOOR OPEN WHILE SETTING THE
minutes to complete the setting of the Clock. Otherwise, each step
must be accomplished within 60 seconds.

WEIGHT SENSOR

weight icon blinks and progress bar shows the
with only the Turn Table glass in the cavity.
starts and the display shows:
is fi nished, the Microwave returns to stand by mode.
P &H S
RESS OLD THE TOP BUTTON FOR A FEW SECONDS
A to set the hours.
DJUSTABLE KNOB
. (The two right-hand digits (minutes) flicker).
A to set the minutes.
DJUSTABLE KNOB
.
and in operation.
for some 6th sense functions (Defrost, Crisp
GB
or after a power failure, the
C . This gives you 10
LOCK
in