Advertisement
USER MAINTENANCE
WARNING: The machine must be
switched off and the battery unplugged.
Remove the inner plastic cover to gain access to
the electrical panel.
Check and replace a blown fuse with one of a
similar value if necessary.
Reassemble the covers in reverse order.
If the drying results are poor or leaving streaks
then remove and clean the squeegee.
Check that the lips are not torn or damaged and
that they are not "feather edged", if they are they
should be replaced.
20
DESCRIPTION OF CONTROLS
1 - Forward speed selector
2 - Traction motor overload indicator
3 - Automatic brush changing selector
4 - Brush unlock
5 - Brush drive ON/OFF
6 - Raise brushes
7 - Lower brushes
8 - Increase brush pressure
9 - Decrease brush pressure
10 - Clean liquid flow selector
11 - Clean liquid boost pump ON/OFF
12 - Recovery tank full indicator
13 - Display data selector
14 - Data display (Brush pressure, Hours, Minutes, Error codes.)
15 - Error code indicator
16 - Rotating beacon ON/OFF (Optional extra)
17 - Master key switch
18 - Steering wheel
19 - Battery condition indicator
20 - Recovery tank discharge pump ON/OFF
21 - Suction motor and squeegee lower/lift ON/OFF
22 - Horn push
23 - Headlights ON/OFF
24 - Emergency stop button (Turn in direction of arrow to release)
25 - Foot brake
26 - Forward/reverse traction accelerator
Note: Switches indicating ON/OFF require pushing once for ON to start
then pushing once again for OFF.
5
Advertisement
