Related Manuals for bon BSM-093N3G
Summary of Contents for bon BSM-093N3G
- Page 1 Multi-Format Broadcast Monitor BSM-093N3G, BSM-173N3G, BSM-183N3G, BSM-213N3G, BSM-243N3G User’s Guide...
-
Page 2: Table Of Contents
Contents Safety Instructions........................3 Front............................4 Rear.............................6 MENU Description........................8 VIDEO............................9 DISPLAY 1..........................10 DISPLAY 2..........................12 COLOR.............................14 MARKER..........................15 OSD............................17 OSD 2............................19 AUDIO............................20 GPI............................22 SYSTEM...........................24 USB Firmware Update......................26 External Remote Control......................27 List of Compatible Video Formats (HDMI/Composite)............29 List of Compatible Video Formats (SDI)..................30 Specifications..........................32 Dimensions..........................35 Troubleshooting........................36 Warranty Information........................38 Modification of Product......................38... -
Page 3: Safety Instructions
Safety Instructions • To help avoid damaging your monitor, connect only one power (AC or DC) in operation. • Rough handling of product may cause physical damage or malfunction. • Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. -
Page 4: Front
Front 1) Power 2) Menu 3) Enter 4) SDI 1, SDI 2 Input 5) HDMI/DVI Input 6) Analog Switch analog input in the order of CVBS1 -> CVBS2 -> CVBS3 -> SVIDEO -> YPbPr -> RGB -> VGA. 7) WF/VS Waveform / Vectorscope display selection button. - Page 5 8) Marker On/Off 9) Scan Switch scan mode among Zero Scan, Under Scan, Over Scan, Pixel to Pixel in HD resolution. Zero Scan, Under Scan, Over Scan, Pixel to Pixel in SD resolution. 10) H/V Delay 11) R/G/B Gray Switch for Red/Green/Blue/Gray only. 12) Function Keys User-assigned function keys.
-
Page 6: Rear
Rear ① ⑦ ⑧ ② ⑥ ③ ④ ⑤ ⑩ ⑪ ⑫ ⑨ 1,2) SDI Port 3) Component YPbPr/RGB or CVBS 1,2,3 Port 4) HDMI Port 5) DVI-I Port 6) Loop-Through Out for SDI-1/SDI-2 or YPbPr 7) AC Input Please check Power Cord, Power Voltage, Supply power for power input are suitable for the standard before use. - Page 7 Please do not mix AC power and DC power as it may cause the defects or fire. 8) DC Input For DC power supply. Check the DC Input voltage. In case of using the Battery power, DC 11 ~ 27V is usable. 9) Update Port The Serial communication terminal that for changing the operating program(Firmware) of the body or controlling the monitor.
-
Page 8: Menu Description
MENU Description General Cautions for OSD menu or Display The menu may not be displayed even when user pressed Menu button if there's No Signal, or in unclear signal status. The menu selection may be saved for each input signal mode, so sometimes user should do menu selection again. -
Page 9: Video
VIDEO Brightness, Contrast, Chroma, Phase, Sharpness Adjust color representation values. SDI 3G Mode Turns on SDI 3G mode to accept 3G signal. SDI Switching Normal : Use Normal in general condition but the screen might be blinking on screen change when you use Matrix or Routing Switcher. Fast : Use Fast to minimize blinking on screen change. -
Page 10: Display 1
DISPLAY 1 Aspect Set the aspect ratio of the screen. 16:9, 4:3, Native(Original) are selectable. 1:1 Scan Set this on to display picture in 1:1 pixel mapping. Set this mode to set aspect ratio. Waveform Display Select waveform display mode. Choose Normal to analyze whole screen, choose Line Select to analyze a specific line of the screen. - Page 11 WFM & VS Position Set the position of Waveform/Vector Scope on screen. False Color Turn False Color mode on to check exposure levels of the picture.
-
Page 12: Display 2
DISPLAY 2 Exposure Range Check (Video Range Check) Checks Y, C level and displays over-exposed or under-exposed area on screen. The base value can be Y, Cb, or Cr. Y Range Max / Min Set Y range value for range check. C Range Max / Min Set C range value for range check. - Page 13 Focus Assist Color Set brush color of focus assist mode among Blue, Green, and Red.
-
Page 14: Color
COLOR Color Temperature Select color temperature among 3200K, 5400K, 6500K, 9300K or USER. (Gain and Offset menu are displayed on USER temperature only) Red/Green/Blue Gain (USER mode only) R,G,B gains are adjustable on User mode. Red/Green/Blue Offset (USER mode only) R,G,B offsets are adjustable on User mode. -
Page 15: Marker
MARKER Marker Ratio Select one of preset markers or user marker. To display marker, press Marker button in front of the monitor. Center Marker Set preference to display center marker or not. Safety Area 16:9 Adjust size of the safety area when marker displayed on 16:9 screen. Safety Area 4:3 Adjust size of the safety area when marker displayed on 4:3 screen. - Page 16 User Marker H1 / User Marker H2 / User Marker V1 / User Marker V2 Set user marker’s position. H1 for left, H2 for right, V1 for top, V2 for bottom. The positions are saved as the selected marker name such as USER1.
-
Page 17: Osd
Timecode Display On/Off Timecode Position Set the position of timecode. OSD Display Time Set menu display time (seconds) MENU Position Set menu position among Left Top, Right Top, Left Bottom, Right Bottom and Center. V-Chip SD-SDI, Composite signal might contain V-Chip data. Turn this mode on to display V-Chip information on screen. - Page 18 Service 1: general captions. Service 2: translated captions. Service 3,4: not assigned. CC608 StartLine Display line of captions are selectable by user. (e.g. 13) Internal Pattern Show internal test pattern such as color bars. Turn this mode off to display general pictures from input port.
-
Page 19: Osd 2
OSD 2 PIP Source Select Picture-in-Picture source. PIP Mode Large PIP, Small PIP, Side by Side can be selected. PIP Position Sets sub-picture position. -
Page 20: Audio
AUDIO Embedded Audio Left Select audio channel for left (Ch 1 ~ 15) Embedded Audio Right Select audio channel for right (Ch 2 ~ 16) Audio Level Meter Turns on/off audio level meters. Level Meter Size Select the size of the meters : Small or Large. Level Meter Position Select the position of the meters : Upper or Lower. - Page 21 Speaker Volume Set volume of speaker.
-
Page 22: Gpi
GPI Control Turns on/off external monitor control function. GPI Port 1,2,3,4,5,6 Assigns each GPI port’s function. (e.g. SDI 1 input, HDMI input, Tally Red) See EXTERNAL REMOTE CONTROLLING section for details. Remote ID Number Assigns the ID for the monitor to control through serial port. 0 to 99 can be assigned. - Page 23 Connection Port This port should be assigned to each monitor device differently to distinguish each one. If you use a single monitor to control, you can leave it unchanged. MAC Address This address is unique address for each network device. User does not need to change it.
-
Page 24: System
SYSTEM Function 1,2,3,4 Assigns a function to each function button. See FRONT section for detail. Backlight Set the backlight intensity from 0 to 40. An LCD panel requires more than 30 minutes to be settled to a new backlight value. Front Button LED Set front LEDs on/off status. - Page 25 Firmware Version This version number is required when you request for service. Operating Time This indicates total hours that the monitor operated.
-
Page 26: Usb Firmware Update
Error Message when USB access Message when file on USB or file not exist detected You can also use Serial Port and your PC to update the firmware. Please request for help to your local dealer or directly to BON Electronics. -
Page 27: External Remote Control
External Remote Control Connecting GPI Port(RJ-45) Update Port (RJ-11) Update (RJ-11) Update Terminal Assignment 1 PIN 4 PIN 2 PIN 5 PIN 3 PIN 6 PIN * Turn power off first and connect update cable when you update monitor firmware. Remote Control / GPI Port Pin Assignments Remote (RJ-45) Remote PIN Assignment... - Page 28 Assignable functions are listed below. Function Name Description SDI-1 Input Switches the input to SDI-1 SDI-2 Input Switches the input to SDI-2 HDMI Input Switches the input to HDMI YPbPr Input Switches the input to YPbPr CVBS-1 Input Switches the input to CVBS-1 CVBS-2 Input Switches the input to CVBS-2 CVBS-3 Input...
-
Page 29: List Of Compatible Video Formats (Hdmi/Composite)
List of Compatible Video Formats (HDMI/Composite) INPUT Signal Input Composite HD-YPbPr Formats SD-RGB HDMI NTSC 720*576/50i 720*480/59.94i 720*480/60i 720*576/50p 720*480/59.94p 720*480/60p 1280*720/23.98p 1280*720/24p 1280*720/25p 1280*720/29.97p 1280*720/30p 1280*720/50p 1280*720/59.94p 1280*720/60p 1920*1080/50i 1920*1080/59.94i 1920*1080/60i 1920*1080/23.98p 1920*1080/24p 1920*1080/25p 1920*1080/29.97p 1920*1080/30p 1920*1080/50p 1920*1080/59.94p 1920*1080/60p... -
Page 30: List Of Compatible Video Formats (Sdi)
List of Compatible Video Formats (SDI) HD/SD-SDI Input Signal Formats Single YUV4:2:2 YUV4:4:4 RGB444 NTSC 525/60i (SD) 625/50i (SD) 720*480/59.94p 720*576/50p 1280*720/23.98p 1280*720/24p 1280*720/50p 10 1280*720/59.94p 11 1280*720/60p 1920*1035/59.94 13 1920*1035/60i 14 1920*1080/50i 1920*1080/59.94 16 1920*1080/60i 1920*1080/23.98 1920*1080/23.98 19 1920*1080/24p 20 1920*1080/24psf 21 1920*1080/25p 22 1920*1080/25psf... - Page 31 32 2048*1080/24p 33 2048*1080/24psf 34 2048*1080/25p 35 2048*1080/25psf 2048*1080/29.97 37 2048*1080/30p...
-
Page 32: Specifications
Specifications BSM-093N3G BSM-183N3G BSM-212N3G BSM-242N3G 2 x HD/SD- 3G/ HD/SD-SDI, 2.97G/1.485G/270M 3 x Analog Analog(YPbPr/CVBS/S-Video/RGB) Input 1 x HDMI HDMI (with HDCP v.1.1), 19pin Female 1 x DVI DVI-I, 24pin, Female 1 x VGA DVI-I to VGA Jack (with gender) - Page 33 BSM-173N3G Specifications Size 17.3" Resolution 1920 x 1080 Pixel Pitch 0.1989*0.1989 mm Color 16.7M(6bit+HiFRC) Colors Viewing Angle 160(H), 140(V) Luminance of White 400 cd/m² Contrast 600 ; 1 Back Light Display Area (H x V) 381.888 x 214.812 mm (15.0 x 8.5 inches) Input 2 x BNC HD/SD-SDI, 3G/1.485G/270M...
- Page 34 SMPTE 125M/259M 720*480i/60,59.94, 720*576i/50 ITU R-BT.656 576i(50) Composite 720*480i(NTSC)/576i(PAL) Component, VGA 480i/p ~ 1920 * 1080i/p DVI Signal 480i/p ~ 1920 * 1080i/p HDMI Digital ~ 1920 * 1200i/p(de-embedded Audio 2ch) Audio Input/Output 1 x Phone Jack In Line In(Stereo) Line Out(Rear,Stereo), Headphone 2 x Phone Jack Out Out(Front, Stereo)
-
Page 35: Dimensions
Dimensions BSM-093N3G 223 x 174 x 50.2 mm (8.7 x 6.8 x 1.9 inches) BSM-173N3G 411 x 299 x 62mm (16.1 x 11.7 x 2.4 inches) BSM-183N3G 438.4 x 310.8 x 66.4mm (17.2 x 12.2 x 2.6 inches) BSM-213N3G 505.6 x348.0 x 59.2mm (19.9 x 13.7 x 2.3 inches) -
Page 36: Troubleshooting
(Call for Service if the Symptom appeared more than 3 times) in startup process Screen is Black on Startup and there's neither BON Logo nor "No Reconnect the Power and Restart the Monitor. Signal" Display, but Buttons are (Call for Service if the Symptom appeared more than 3 times) - Page 37 Strange Color on BON Logo on Reconnect the Power and Restart the Monitor. Startup (Call for Service if the Symptom appeared more than 3 times) Make Monitor "Factory Default" and Try again. Select Test Pattern(Internal Pattern) in the menu and See if R,G,B Color is Correct.
-
Page 38: Warranty Information
• damage caused by service performed by anyone who is not an authorized service provider • damage to a product that has been modified or altered without the written permission of BON Service to be Charged If the product needs to be repaired after 12 months from the purchase. - Page 39 Corporate Headquarters Tresebelle-Sky 2F, 1479 Gayang-2, Gangseo-gu, Seoul, South Korea Research / Service Center Vision Tower 7F, 1481 Gayang-2, Gangseo-gu, Seoul, South Korea Telephone +82 2 2659 0333 +82 2 2659 8133 http://www.bon.co.kr Email salesbon@bon.co.kr...
Need help?
Do you have a question about the BSM-093N3G and is the answer not in the manual?
Questions and answers