No Paper/Tray Not Detected (Bypass Tray); Paper Size Mismatch/Paper Type Mismatch (Tray 1); Paper Size Mismatch/Paper Type Mismatch (Tray 2/3) - Sawgrass Virtuoso SG400NA User Manual

Print by Form Feed.

Press the [Form Feed] key, select a different paper tray, then print.
Cancel the print job.

See section "Cancelling Printing" for more information.

No Paper/Tray Not Detected (Bypass Tray)

The bypass tray has run out of paper or the bypass tray is not installed correctly.
Follow the procedure below:
Load paper into the paper tray.

See section "Loading Paper" for more information.
Attach the bypass tray properly.

See section "Attaching and Detaching the Bypass Tray" for more information.
Print by Form Feed.

Press the [Form Feed] key, select a different paper tray, then print.
Cancel the print job.

See section "Cancelling Printing" for more information.

Paper Size Mismatch/Paper Type Mismatch (Tray 1)

Tray 1 is not loaded with paper of the correct size or type.
Follow the procedure below:
Change the paper settings.

See section "Using the [Paper Input] Menu" for more information.
Print by Form Feed.

Press the [Form Feed] key, select a paper tray containing paper of the specified size or
type, then print.
Cancel the print job.

See section "Cancelling Printing" for more information.

Paper Size Mismatch/Paper Type Mismatch (Tray 2/3)

Tray 2/3 is not loaded with paper of the correct size or type.
Follow the procedure below:
Change the paper settings.

See section "Using the [Paper Input] Menu" for more information.
Print by Form Feed.

Press the [Form Feed] key, select a paper tray containing paper of the specified size or
type, then print.
Troubleshooting | 119