Ingrasys G2214H User Manual page 29

–-
Access Port
This page provides the ports configuration for requesting the services from the camera device. These services
include Web Page access, HTTP and RTSP streaming services.
HTTP port / HTTPS port: By default, the HTTP and HTTPs ports are set to 80 and 443 respectively. They
can also be assigned to another port number between 1025 and 65535.
The HTTP port is basically provided for device's webpage access. When the video format is set to MJPEG,
user is able to retrieve the live video via HTTP URL, e.g.
Http://<ip_address>/operator/get_video.cgi?channel=[1, 2]
, where channel is to specify stream1 or stream2
RTSP port: RTSP (Real-Time Streaming Protocol) is used to control the live media streaming. This port is
provided to request the streaming service. By default, the port number is set to 554. It can also be assigned to
another port number between 1025 and 65535.
Multicast: Multicast is a streaming method with bandwidth conserving technology. By delivering a single
video stream to multiple network clients, the bandwidth utilization can be reduced.
Select the Always multicast option to enable multicast for stream 1 ~ 2.
Multicast Group Address – Set the IP address for multicast streaming. The Multicast IP address must be in
the range from 224.0.1.0 to 239.255.255.255.
Multicast Ports – Set the port for multicast streaming.
Multicast TTL – The multicast Time-To-Live (TTL) gives the range of routers that multicast traffic can pass
through in the networks.
28