Page 2
If you find any discrepancy or can't find certain information, please contact us. We will be glad to be of assistance. JET-TECH SYSTEMS 5771 Ferrier street Montreal, Quebec H4P 1N3 Tel.: 888-275-4538 (888-ASK-4-JET) ; 514-737-9701 Fax: 514-342-3854 e-mail: service@jet-tech.com...
Systems, within the continental United States of America or Canada; provided that: prior authorization for this labor was approved by Jet-Tech Systems, the service work was performed by an authorized Jet Tech service agency; and that this agency installed an original and genuine Jet Tech part in the machine. Any repair work performed by a non-authorized service depot remains the sole responsibility of the user, and Jet Tech Systems will not be held responsible.
DRAIN The X‐32 is equipped with an automatic drain pump that will pump the drain water to a maximum height of 36" (0.9 meter). A 1" ID flexible drain hose is included to facilitate maintenance and servicing of the machine. It is important not to reduce the size of this hose.
Page 6
ELECTRICAL Unit must be connected with a 110 volts 60Hz line. The terminal block will receive L1, N and Ground wire. Unit must be well grounded. Breaker rating should be 15 amps.
Getting Started Immediately upon receipt of your new X-32 dishwasher, inspect the dishwasher for any obvious signs of damage. If you do find any traces of damage, contact the transport company that brought the dishwasher to your place at once.
Chemical hook-up This unit is equipped with three (3) chemical pumps. Each will inject a different liquid product at a specific time during the wash cycle. The chemical pumps have sufficient length of tubing hose that can be inserted in gallon containers near the dishwasher.
OFF position. Second function: is for de-lime. The operator must put the de-liming chemical product in the water in the wash tank of X-32 and then push the black button. When the de-lime...
Need help?
Do you have a question about the X-32 and is the answer not in the manual?
Questions and answers