Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with 1 609 92A 0CM | (6.12.13) Bosch Power Tools...
Page 6
For example, when a make exposed metal parts of the power tool “live” and screw is to be loosened and the direction of rotation is set could give the operator an electric shock. Bosch Power Tools 1 609 92A 0CM | (6.12.13)
The vapours can irri- 19 Cavity in the housing shell tate the respiratory system. Use the battery only in conjunction with your Bosch 20 Open-end spanner, size 27 mm* power tool. This measure alone protects the battery 21 Open-end spanner, size 22 mm* against dangerous overload.
“Technical Data” is in conformity with the fol- lowing standards or standardisation documents: EN 60745 according to the provisions of the directives 2009/125/EC (Regulation 1194/2012), 2011/65/EU, 2004/108/EC, 2006/42/EC. Robert Bosch GmbH, Power Tools Division Technical file (2006/42/EC) at: D-70745 Leinfelden-Echterdingen Robert Bosch GmbH, PT/ETM9, Leinfelden, 26.11.2013...
Battery Charging should be between 0 °C und +45 °C at an allowable relative Use only the battery chargers recommended by Bosch humidity between 20 and 95 %, free of moisture condensa- for this power tool. Only these battery chargers are tion.
– Left Rotation: For loosening or unscrewing screws, push Configuring the Power Tool the rotational direction switch 11 right to the stop. With the BOSCH EXACT Configurator software, different pow- Switching On the Worklight er tool settings (e. g., speed, driving stages, repeat protec- The work area illumination 13 makes possible the lighting of tion) can be configured.
Turning in the clockwise direction results in a higher torque, in mild solvent. Follow the solvent manufacturers directions the counterclockwise direction, a lower torque. for use and disposal. Lubricate the gearbox using Bosch gearbox lube. Repeat the lubrication procedure every – Remove the adjustment tool 25. Shut the torque selector 300 hours after the initial gearbox service.
10-digit article number given on the type plate of tion “Transport”, page 21. the machine. Robert Bosch GmbH is responsible for the delivery of this product in accordance with the sales contract within the framework of the legal/country-specific regulations. For claims with respect to the product, please contact the follow- Subject to change without notice.
Need help?
Do you have a question about the ANGLE EXACT ION 18 V-LI and is the answer not in the manual?
Questions and answers