Connecting External Components; Connecting The Fm Antennas - Samsung MAX-DA75 User Manual

Connecting External Components

Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
(not supplied)
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX/PORT to select AUX 1.
•
' AUX 1' appears in the display.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
AUX2 : Rear Panel
Audio Cable
(not supplied)
If the external analog
component has only
one Audio Out, connect
either left or right.
15
Downloaded From Disc-Player.com Samsung Manuals
Audio Cable
If the external analog component
has only one Audio Out, connect
either left or right.
1
Connect AUX IN 2 (Audio) on the MINI COMPONENT
rear panel to the Audio Out of the external analog
component.
Be sure to match connector colors.
2
Press the AUX//PORT button to select <AUX2> input.
The mode switches as follows : AUX 1 AUX 2.
OPTICAL:Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver(Set -Top Box).
Extermal Digital Component
1
Connect the Digital Input(OPTICAL) on the Mini Component to the Digital Output of the
external digital component.
2
Press the AUX/PORT button to select DIGITAL IN.

Connecting the FM Antennas

FM Antenna (supplied)
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM
antenna.
• This unit does not receive AM broadcasts.
Note
Optical Cable
(not supplied)
16
ENG