Description Of Error Codes - Fronius Selectiva Plus E Operating Instructions Manual

WALL MOUNTING OF THE SELECTIVA
PLUS E
- Place the charger on the wall holder (push lug
holder into the slot in the plastic front panel
- Fasten the charger to the wall holder using the two screws
supplied (diam. 3.5 * 9.5 mm)
Fig.3 Wall mounting of Selectiva Plus E

DESCRIPTION OF ERROR CODES

Display
N.B.! When fastening the wall holder to the wall, allow for the
great weight (6 kg) of the wall holder + charger. The wall holder
may only be fixed to a suitable wall.
of the wall
)
- Mount the wall holder using suitable dowels and screws placed
Condition
Error 12: Phase failure
Error 14: Electrolyte circulation pump has
failed; the charging operation is continued
Error 22: battery undervoltage
Error 23: battery overvoltage
Error 31: overrun of charging time during
phase I1
Error 32: overrun of charging time during
phase U1
Error 33: battery overvoltage (during addi-
tional charge only)
Error 401-420: charger is faulty
11
through the fixing holes
Elimination
Check the electrical installation and the
mains connection
Check the electrolyte circulation pump and
the air hose; acknowledge the error message
by pressing the Start / Stop button
Check parameter settings and battery volta-
ge, check battery for failure
Check parameter settings and battery
voltage
Check battery for failure
Check battery for failure
Check parameter settings and battery
voltage
Contact your dealer