Related Manuals for Water Control BrassMaster
Summary of Contents for Water Control BrassMaster
- Page 1 Time-clock water softener Installation / Operation manual—WI Manufactured by: Water Control Corporation 7150 143rd Ave NW Ramsey, MN 55303 Tel: 763-427-9635 Fax: 763-427-5665...
-
Page 2: Installation Procedure
Installation procedure 1. Identify installation location for water softener. Piping should be such that all household water, with the exception of outside hydrants, flows through softener. A hard water line may be run to a kitchen tap if so desired. This system and installation must comply with state and local laws and regulations. - Page 3 Start-up procedure 1. Filling the mineral tank with water: Turn the manual regeneration knob until “backwash” appears in the program window. Slowly turn bypass valve to the service position, allowing for water to fill the tank. When tank is full and all air has been bled from the system, water will flow to the drain line.
-
Page 4: Limited Warranty
Warranty / Maintenance information All BrassMaster water softeners feature Assured Performance Modular (APM) design. If you experience a failure of any valve component, the brass module can be easily removed and replaced with a factory remanufactured replacement module. To remove module, index the bypass valve to its “Bypass”...
Need help?
Do you have a question about the BrassMaster and is the answer not in the manual?
Questions and answers