Do you have a question about the LAVATHERM 33600 and is the answer not in the manual?
Questions and answers
Marie Jackson
March 20, 2025
How do I clean the condenser for this tumble dryer
1 comments:
Mr. Anderson
March 20, 2025
To clean the condenser of the AEG LAVATHERM 33600 tumble dryer, follow these steps:
1. Turn Off and Unplug – Ensure the dryer is switched off and unplugged from the power source for safety.
2. Open the Condenser Compartment – Locate the condenser compartment at the lower front of the dryer. Open the cover by pressing the release mechanism.
3. Remove the Condenser Unit – Pull out the condenser carefully by gripping the handle or edges.
4. Rinse the Condenser – Wash the condenser under running lukewarm water to remove lint and debris. Do not use sharp objects or high-pressure water to avoid damage.
5. Allow to Dry – Shake off excess water and let the condenser air dry completely before reinstalling.
6. Clean the Compartment – Wipe the inside of the condenser compartment with a damp cloth to remove any remaining lint.
7. Reinstall the Condenser – Once dry, place the condenser back into its compartment, ensuring it fits securely.
8. Close the Compartment Cover – Lock the cover properly before using the dryer again.
For best performance, clean the condenser regularly, approximately once a month or after every 10 drying cycles.
Need help?
Do you have a question about the LAVATHERM 33600 and is the answer not in the manual?
Questions and answers
How do I clean the condenser for this tumble dryer
To clean the condenser of the AEG LAVATHERM 33600 tumble dryer, follow these steps:
1. Turn Off and Unplug – Ensure the dryer is switched off and unplugged from the power source for safety.
2. Open the Condenser Compartment – Locate the condenser compartment at the lower front of the dryer. Open the cover by pressing the release mechanism.
3. Remove the Condenser Unit – Pull out the condenser carefully by gripping the handle or edges.
4. Rinse the Condenser – Wash the condenser under running lukewarm water to remove lint and debris. Do not use sharp objects or high-pressure water to avoid damage.
5. Allow to Dry – Shake off excess water and let the condenser air dry completely before reinstalling.
6. Clean the Compartment – Wipe the inside of the condenser compartment with a damp cloth to remove any remaining lint.
7. Reinstall the Condenser – Once dry, place the condenser back into its compartment, ensuring it fits securely.
8. Close the Compartment Cover – Lock the cover properly before using the dryer again.
For best performance, clean the condenser regularly, approximately once a month or after every 10 drying cycles.
This answer is automatically generated