Symptom:
BATTERY VOLTAGE OPEN
OPEN B+ CIRCUIT
FRONT CONTROL MODULE
TEST
1
NOTE: This DTC must be active to perform this test. If DTC is stored, erase
DTC and check for an intermittent condition.
Turn the ignition off.
Remove the Front Control Module from the IPM.
Using a 12-volt test light connected to ground, probe the B+ circuit (cav 10).
Is the test light illuminated?
Yes → Replace the Front Control Module in accordance with the service
No
POSSIBLE CAUSES
ACTION
information.
Perform BODY VERIFICATION TEST - VER 1.
→ Replace the Power Distribution Center (PDC) in accordance with
the service information.
Perform BODY VERIFICATION TEST - VER 1.
IGNITION, POWER, ACCESSORY
417
APPLICABILITY
All
Need help?
Do you have a question about the Ram 2004 and is the answer not in the manual?
Questions and answers