Qvis CORTEX Installer's Quick Setup Manual

RANGE

1. DEVICE CONNECTIONS

BEFORE INSTALLING ANYTHING WE STRONGLY RECOMMEND THAT YOU CONNECT YOUR CAMERAS TO YOUR DVR AND TEST YOUR
SYSTEM FIRST. WE CHECK EVERYTHING TO MAKE SURE IT IS WORKING WHEN IT LEAVES US BUT VERY OCCASIONALLY THINGS FAIL AND
IT IS BETTER TO KNOW NOW THAN AFTER YOU HAVE FITTED EVERYTHING!
IP Camera
1.
More detailed instructions on how to operate
your NVR are included in the Quick Users Guide,
which is on the setup USB pen drive included.
We refrain from printing these large manuals in
an effort to limit our impact on the environment.
®
INSTALLER'S QUICK SETUP GUIDE
Power Adaptor

Ethernet Connection

2.
Ethernet Connection
Connect camera's
ethernet port to ethernet
cable.
For full instructions see the Users Guide found on the USB pen drive provided with the NVR
Output to TV or Monitor
HDMI/VGA/RCA
Power to
POE Switch
PoE Switch
3.
Ethernet connector
to POE Switch
Connect camera to POE
switch to provide camera
with power.
STILL NEED HELP?
Then speak to our engaging technical team via our
webchat service found upon our website:
www.adata.co.uk
(023) 92488302
or if you prefer to call:
Connect the
mouse to the
USB socket
Cortex NVR
4.
POE Switch
to NVR
Connect POE Switch to
ethernet port at the rear
of the NVR.
CORTEX NVR
Power Adaptor
NVR Power
Complete Connection
Setup
Connect peripheral
devices to NVR and
provide power.
Look for this webchat
bubble on our website
to connect to one of
our technical team
members.